The white of the circuit and rally Ford Escort RS. A Number Five shade for bodywork on which colored stripes are masked.
Responsibility details are not available.
The RS abbreviation appeared on the Escort in 1970 with the RS1600 version, powered by a sixteen-valve Cosworth BDA engine. The cars were built by a separate division, Advanced Vehicle Operations, and the Mexico and RS2000 models soon joined it. The second generation then collected so many sharp results in competition with the RS1800 version that it became the measure for the whole class of rear-wheel-drive cars of the end of the 1970s.
A white body with contrasting graphics was the recognition feature of these cars. That is precisely why the shade is useful to a modeler differently from other whites: it almost never stays alone but serves as the layer beneath stripes, numbers and sponsor lettering.
Light tones belong on a model before dark ones. Spray the area white, let it cure properly and only then stick masking tape on, otherwise the tape will tear it away with it when pulled off. The edges of the stripes will come out sharp if you first spray over the edge of the mask with the very same white that lies beneath it and only then apply the second color.
You will also use it on the white areas of winged Group B cars and on service vans for dioramas, where it forms a calm counterpoint to striking racing colors.
Before spraying it is worth checking the preparation of the surface again. A white area works like a magnifying glass on sanding: fine scores left by paper, which are lost under dark paint, stay visible here even after polishing. Sanding down with a finer grit therefore pays off more than with a darker car.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!