Fine Sanding Stick from AK interactive is a fine sanding stick in 600 grit for smoothing the surface after coarser sanding and preparing it under a primer or a clear coat. A modeling tool, not a kit.
Responsibility details are not available.
Fine Sanding Stick from AK interactive is a modeling tool, not a kit. It carries fine 600 grit abrasive and comes in at the moment when the rough work is done: it smooths the surface after coarser sanding, evens it out and prepares it under a primer, paint or a clear coat. The grade of abrasive is told apart by the color of the stick, and with these sticks the manufacturer stresses their longer life thanks to the quality of the abrasive used.
A fine stick is a tool of the final stage. It is used to smooth out the marks left by coarse sanding, level filler finely, even out the surface around a repaired spot and for sanding between coats, that is a light pass over a dried layer of primer or clear coat so that the next layer goes on smoothly and holds no grains and hairs.
The key thing that beginners most often get caught by: a fine grit will not repair a mistake made by a coarse one. Grit 600 is a high number, that is a fine abrasive: it takes off little and merely polishes deep scratches left by coarse abrasive instead of removing them. The scratch then disappears from view but comes back as soon as gloss varnish goes on the part. So always work from coarser to finer: first the Coarse Sanding Stick in 150 grit to take material off, and only then this fine 600 to finish. The two sticks form a natural pair.
For modelers who care about the surface, which means anyone who paints a model in the end. It works best as the second step after a coarse stick; on its own it will not take off much material and it is not meant for casting blocks or flash. Rinse it after use and let it dry, as sanding sticks are generally reusable.
Even fine sanding releases dust, so do not breathe it in. Work in a ventilated space, protect your airways and, if the surface allows it, sand wet.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
