Hexagonal bolts and nuts 1.5 mm from the maker Aber. Turned metal imitations of hardware; the maker recommends this size for 1:16 scale.
Responsibility details are not available.
A modeling material from the Polish maker Aber, not a kit. The package holds turned metal imitations of hexagonal bolts and nuts of a size of 1.5 mm. The maker recommends this size for 1:16 scale, that is for large models of tanks and vehicles, where an individual bolt is clearly legible. You can use it anywhere you need a hexagon of precisely this size, though - what decides is the resulting look on the model, not the scale on the label.
At the place where the bolt is to go, drill a hole matching the shank with a micro drill, seat the head with tweezers and fix it with a drop of cyanoacrylate glue applied with a pin. In large scales it pays to mark the spacing out in advance with a soft pencil or to prepare a paper template - irregular spacing shows up at once on a large model. Degrease the metal with alcohol before painting and apply a metal primer, otherwise the heads will rub off during handling. You will create the patina with a dark wash around the heads and a hint of rust from a pigment.
For modelers of large scales, especially for builders of vehicles in 1:16, and for anyone who does conversions and needs faithful hexagonal heads of a size of 1.5 mm. It assumes experience with micro drilling and with working on small metal parts.
This is a modeling material, not a kit. The parts are small, so keep them out of the reach of children. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
