Masking Tape Flauge Reel - 4 sets

A masking tape wound on a reel; the package contains four sets. A consumable supply for painting models, not a part for a model.

Manufacturer Master Tools
Product EAN8591111000000

Responsibility details are not available.

7.16 €
5.92 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking tape on a reel

This is a masking tape wound on a reel; according to the name the package contains four sets. It is a consumable modeling supply for painting, that is nothing that would be stuck onto a model permanently. A reel suits places where you need to unwind a longer continuous strip, for example along a long edge of a fuselage or a hull. On top of that, a stock of four sets lasts a long time, so the tape will not run out in the middle of a job.

Where you will use the tape

  • defining a sharp transition between two shades
  • covering finished surfaces and parts against overspray
  • masking the frames of glazing and vision ports
  • cutting a stencil of your own shape with a sharp blade
  • holding small parts temporarily while spraying

How to work with the tape

The surface has to be clean, dry and degreased. Apply the tape before spraying, never onto fresh paint, and press the edge down along its whole length, otherwise paint will creep under it. On curved shapes do not pull the tape by force, but lay it in two parts with a small overlap. Spray thinly and lead the nozzle from the edge toward the inside of the area. Take the tape off shortly after the paint has dried, slowly and by pulling it back over itself at a shallow angle. With older finishes, reduce the tack first by sticking the tape onto the back of your hand and test it in an inconspicuous place.

Terms of supply

Paints, thinners and a model are not part of the delivery, unless stated otherwise. The width of the tape and the length of the roll are stated on the manufacturer's packaging.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name the package contains four sets. You will find the width of the tape and the length of the roll on the manufacturer's packaging.

Always before spraying, to a clean, dry and degreased surface. Press the edge down along its whole length, so that no paint creeps under it.

Shortly after the paint has dried. Pull slowly, back over itself and at a shallow angle, so that the edge of the finish does not lift.

It can, if the lower layer is not completely cured. Reduce the tack by sticking the tape onto the back of your hand and test it in a hidden place.

Last seen

Master ToolsMT09978

Masking Tape Flauge Reel - 4 sets

A masking tape wound on a reel; the package contains four sets. A consumable supply for painting models, not a part for a model.
In stock
7.16 €
AiresAIR41561:48

1:48 Bf 109G wheels & paint masks

Bf 109G wheels and paint masks 1:48 is a resin set of wheels with masks from Aires for the German Messerschmitt Bf 109G fighter. The accessory raises the detail of a plastic kit; it is not a standalone airplane model.
In stock
8 €
EduardED356171:35

1:35 Leaves Fern / Kapraď I

Eduard Leaves Fern I 1:35 is a scenic accessory for a diorama: photo-etched brass fern leaves that the modeler finishes with paint.
In stock
8 €
RB modelRB35P33

21cm Ammunition for Morser 18

21 cm ammunition for the Mörser 18 is a detail set of ammunition rounds in 1:35 scale, intended for the heavy howitzer of 21 cm caliber.
In stock
5.16 €
RB modelRB35P23

95mm OQF L/23

The 95 mm OQF L/23 is a turned metal barrel in 1:35 scale from RB Model, a precise replacement for the plastic barrel of the British tank howitzer for close support.
In stock
5.96 €
RB modelRB35P08

76,2mm L/55 M1

The 76.2 mm L/55 M1 is a turned metal barrel in 1:35 scale from RB Model, a precise replacement for the plastic barrel of the American M1 tank gun.
In stock
7.56 €
RB modelRB35P24

10.5cm leFH18

A set of turned ammunition, 10.5 cm leFH 18 , from RB Model in 1:35 scale - realistic rounds for the German light field howitzer.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.