Model whit corner engraving plate

An engraving template with corner shapes for modelers. It serves as a guide for a scribing tool when restoring panel lines and when engraving the edges of covers and hatches.

Manufacturer U-STAR
Product EAN8591111635257

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

What the aid is for

Engraving is work in which guiding the tool is what decides the result. Freehand, a straight line holds for only a short stretch and a corner comes out differently every time, especially when it is meant to be rounded and the same on both sides of the model. A template takes that part of the work over: you lay it on the surface, rest the point against it and the line and the corner come out the way the template guides them. It finds a use when restoring panel lines after sanding, when suggesting hatches and covers, and anywhere an edge should stay legible even after the paint has been sprayed on.

How to work with it

Fix the template to the surface with masking tape, so that it does not move during the work. Run the scribing tool in several light strokes one after another; one heavy stroke deflects the point and the groove widens or runs off course. Sand the burr that appears with fine abrasive paper, wipe the dust off and check the line against the light. Engraving is done into a bare surface, that is, before painting; into dried paint the line opens up less well and the edges peel.

  • a template for engraving panel lines and corners
  • a reusable modeling aid
  • suitable for restoring lines sanded away after filling
  • it is fixed with masking tape so that it does not slip
  • it works by light repeated strokes, not by one heavy one

Who it is for

The aid suits builders of plastic models who sand joints and need to put the lines back, and also those who add divisions of their own to the surface of a model. The manufacturer gives the exact list of shapes and dimensions on the template on the box.

Terms of supply

This is a reusable modeling aid. The scribing tool, the model and the paints are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It guides the point of a scribing tool when engraving panel lines, the edges of hatches and corners, so that the groove comes out straight and the same on both sides of the model.

This is the template on its own. The manufacturer gives the extent of the delivery on the box.

Before painting, into a bare surface. Into dried paint the line opens up less well and the edges peel.

Fix the template with masking tape and run several light strokes one after another instead of one heavy one. Then sand the burr with fine abrasive paper.

Last seen

U-STARUA80062B

Model whit corner engraving plate

An engraving template with corner shapes for modelers. It serves as a guide for a scribing tool when restoring panel lines and when engraving the edges of covers and hatches.
In stock
6.36 €
LACILAC7200411:72

1:72 HS.748 Andover - Landing Flaps (for Mach 2 Kits)

Resin landing flaps for the HS.748 Andover in 1:72 scale from LACI - an accessory for the Mach 2 model. It is not an airplane model.
In stock
25.56 €
AiresAIR73401:72

1:72 I-153 Chaika control surfaces

A resin set of control surfaces for the I-153 Chaika in 1:72 scale from Aires. It refines the movable surfaces of the Soviet biplane; it is not an aircraft model.
In stock
5.20 €
ReskitRS72-04621:72

1:72 AMX (AMX-T)

An add-on set in 1:72 scale for building the AMX light attack aircraft and its two-seat AMX-T version. The manufacturer's instructions state which parts are included.
In stock
7.56 €
AK interactiveAK473

XTREME METAL COPPER

A metallic AK Xtreme Metal Copper lacquer paint from AK Interactive for the airbrush, with a high metallic shine.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.