Modelling Supplies

AMMO of Mig JimenezA.MIG-3502

AMMO YELLOW

AMMO of Mig Jimenez OILBRUSHER AMMO Yellow is a modeling oil paint in a 10 ml bottle whose cap has a fine brush built into it. It is a modeling paint (a chemical product), not a kit .

In stock

3.16 €

AMMO of Mig JimenezA.MIG-3500

BLACK

AMMO of Mig Jimenez black is a water-thinnable acrylic modeling paint for a brush and an airbrush, suitable as both a base and a mixing shade.

In stock

3.16 €

Master ToolsMT06628

55cm Brass Wire set

Master Tools 55cm Brass Wire Set is a set of two brass wires roughly 55 cm long, a thin solid 0.35 mm and a thicker braided 0.8 mm, for wiring, antennas and cables.

In stock

2.36 €

-25 %Stock Clearance

TamiyaTA74002

Long Nose Cutter

The Tamiya Long Nose Cutter is a pair of modeling nippers with elongated narrow jaws for cleanly separating parts from sprues, even in places that are hard to reach.

3 leftof 6

~~23.96 €~~17.96 € You save 6 €

Master ToolsMT09925

Model Chisel - F3

The Master Tools Model Chisel F3 is a modeling chisel with a flat, square 3 mm blade for engraving straight lines and scraping surfaces.

In stock

11.96 €

Master ToolsMT09924

Model Chisel - F2

The Master Tools Model Chisel F2 is a modeling chisel with a sharp flat metal tip for scribing panel lines, cleaning up seams and removing flash.

In stock

11.16 €

Master ToolsMT09923

Model Chisel - F1

Model Chisel - F1 is a modeling chisel from the Master Tools tool range for parting seams, sprue gate remains and cleaning engraved lines.

In stock

11.16 €

Master ToolsMT09928

Model Chisel - T2

The Master Tools Model Chisel T2 is a modeling chisel from the Model Chisel range with a T profile blade 2.8 mm wide for scribing and cleaning up details.

In stock

11.96 €

Master ToolsMT09927

Model Chisel - RR2

The Master Tools Model Chisel RR2 is a modeling chisel with a 3 mm round blade for engraving wider grooves with a rounded bottom and larger curved details.

In stock

9.96 €

Master ToolsMT09926

Model Chisel - R2

The Master Tools Model Chisel R2 is a modeling chisel with a round, curved blade for engraving grooves with a rounded bottom and for curved details.

In stock

7.16 €

TamiyaTA87056

Finishing Abrasives P800

Tamiya Finishing Abrasives P800 is a fine abrasive paper of P800 grit for smoothing a surface, intermediate sanding and preparation under primer or clear. A modeling aid, not a kit.

In stock

1.40 €

TamiyaTA87054

Finishing Abrasives P400

Tamiya Finishing Abrasives P400 is a set of three sheets of abrasive paper in P400 grit for sanding plastic, metal and wood, dry or wet.

In stock

1.56 €

TamiyaTA87090

Compound Applicator

The Compound Applicator from Tamiya is a soft applicator for applying and buffing out polishing compound that is gentle on a painted surface and will not scratch the gloss.

In stock

11.16 €

SquadronSQ10802

Slide Lock Pin Vise

A pin vise with a slide lock (Squadron) is a tool for precise hand drilling of small holes.

In stock

9.96 €

-25 %Stock Clearance

HasegawaHATT107

Cutting Mat Oblong R edge (400 x 150mm)

A cutting mat with a rounded edge, 400 x 150 mm (Hasegawa) is a work mat for modelers.

Last one!of 2

~~21.96 €~~16.48 € You save 5.48 €

TamiyaTA87129

Maskovací papír (1mm Grid Type, 5 sheets)

The set Tamiya Masking Sheet (1mm Grid Type, 5 sheets) : self-adhesive masking sheets with a millimeter grid for cutting masks accurately.

In stock

5.56 €

TamiyaTA87164

Masking Tape w/Plastic Sheet (550mm)

Tamiya Masking Tape with a plastic protective film (550 mm) is a masking tape with a protective film for quick masking of large areas.

In stock

7.16 €

HasegawaHATP4

Modeling Saw Scriber

Hasegawa Trytool Modeling Saw Scriber (TP-4) is a fine scribing saw with thin photo-etched blades for scribing and deepening panel lines, curves included.

In stock

13.56 €

-25 %Stock Clearance

HasegawaHATP6

Cutting Template B

Cutting Template B from Hasegawa is a photo-etched modeling template of the Trytool line. It serves as a guide for cutting masking tape and for marking out regular shapes, curves and openings.

2 leftof 6

~~15.96 €~~11.96 € You save 4 €

-25 %Stock Clearance

HasegawaHATL2

Template Engraver and Scriber Set

The Template Engraver and Scriber Set from Hasegawa is a modeling tool for scribing panel lines. It combines a metal scriber and templates with which you guide clean straight and curved lines on plastic.

Last one!of 6

~~9.16 €~~6.88 € You save 2.28 €

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.