Stripes 0,8 mm (135x90mm) Oramask foil

Omask masking strips 0.8 mm, Oramask foil - a universal masking sheet with pre-cut strips that you can use on any model. You get a straight line of constant width without laborious cutting from adhesive tape.

Manufacturer Omask
Product EAN8591111000045

Responsibility details are not available.

4.36 €
3.60 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking strips 0.8 mm - Oramask masking foil

A universal Omask masking sheet with pre-cut strips 0.8 mm wide, in the version with Oramask foil. It is not a set cut for one particular kit but a universal template you reach for whenever you need a straight line of constant width on a model. It does away with cutting thin strips from adhesive tape, where the width changes literally with every cut.

What the strips are good for

A thin strip of this width suits the dividing lines between camouflage fields, narrow trim and lines along panels, decorative stripes on the bodies of cars and motorcycles, the framing of areas, and thin bands of markings. You will use it anywhere a hand-cut strip would not hold a constant width and the line would optically wander on the model. Because the masks are universal, they serve across scales and kinds of subject, that is, on aircraft, vehicles, ships and accessories for figures.

How to work with the mask

The surface has to be clean, degreased and perfectly dry; do not stick a mask onto fresh paint. Lift the strip off the sheet with tweezers or the tip of a scalpel, lay it in place and only then press it down gradually along its whole length; on gentle curves work in short sections so the line does not waver. Press the edges home carefully, with a wooden toothpick for instance, so no paint runs under them. Spray several thin layers instead of one heavy one and hold the airbrush perpendicular to the surface. Take the mask off slowly and at a shallow angle to the surface as soon as the paint has set.

Version and choosing a variant

Omask offers the same pattern in two masking media: as Oramask masking foil and as yellow masking tape. The variant offered here is with Oramask foil. The shape and the dimensions are the same in both; only the medium differs, so choose according to what you are used to working with on the bench.

Who the sheet is for

  • modelers who need a thin line of constant width
  • camouflage dividing lines and decorative stripes on bodywork
  • the framing of areas, trim along panels and thin bands of markings
  • a universal companion to ordinary masking tape on the bench

Paints, thinners and tools are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a universal sheet with pre-cut strips of one width. You will use it on any model and in any scale where that shape suits.

The pattern and the dimensions are identical in both versions; only the masking medium differs. This item is the variant with Oramask foil. The choice is the modeler's, according to which material suits them better.

Stick it onto a perfectly dry and degreased surface, press the edges of the mask down all the way round with a blunt tool, and spray several thin layers instead of one heavy one. Hold the airbrush perpendicular to the surface, not at a shallow angle from the side.

Best shortly after the paint has set, not after several days. Peel it off slowly and at a shallow angle to the surface, so you do not pull the edge of the coat away with the mask.

Last seen

OmaskOMK80043

Stripes 0,8 mm (135x90mm) Oramask foil

Omask masking strips 0.8 mm, Oramask foil - a universal masking sheet with pre-cut strips that you can use on any model. You get a straight line of constant width without laborious cutting from adhesive tape.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.