1:24 Sanshirou z Sengoku Ninja Girl Murasaki / Prime Body

1:24 Sanshirou z Sengoku Ninja Girl Murasaki / Prime Body

15.16 €
Add to Cart

1:24 Sanshirou z Sengoku Ninja Girl Murasaki / Prime Body

A kit of a figure of a ninja by the name of Murasaki in 1:24 scale, the execution designated Prime Body. The parts are supplied to be assembled and painted.

Scale1:24
Manufacturer Suyata
Product EAN8591111000000

Responsibility details are not available.

15.16 €
12.53 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

About the item

The figure in 1:24 scale starts from a character by the name of Murasaki, whom the name places in the setting of Japanese ninjas. The epithet Prime Body after the slash distinguishes the execution within the supplier's line; what exactly the package contains is given in the manufacturer's instructions. For an adult character, 1:24 scale works out to a height of around seven centimeters, so this is a small figure on which every stroke of the brush is visible. Check the exact size and the number of parts in the maker's data.

Preparing the parts

First compare the parts with the instructions and try to fit them together dry. Cut the excess material and the traces of production off with a sharp blade a little away from the part and sand the remainder down carefully with fine abrasive paper, so that the shape is not disturbed; on figures this concerns mainly the face and the hands, where the details are the finest. Choose the kind of glue according to the material of the parts: the parts of accessory figures are usually not made of polystyrene, and cyanoacrylate glue holds on them more reliably than glue for plastic models.

Painting the figure

Wash and degrease the parts before painting. It pays to spray the figure with a primer, which unifies the surface and shows any scratches before the paint is applied. Paint in thin coats and start from the areas that will be hard to reach later. Leave the face until the end and work on it in good light and with a magnifier.

  • 1:24 scale
  • a figure of a ninja by the name of Murasaki
  • the execution designated Prime Body
  • supplied as a set of parts to be assembled and painted
  • the number of parts and the contents of the package are given in the manufacturer's instructions

Terms of supply

Paints, brushes, glue and a base are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is supplied as a set of parts that have to be cleaned, assembled and painted.

In 1:24 scale an adult character works out to roughly seven centimeters. The exact height is stated by the maker, because it depends on the pose of the figure.

According to the material of the parts. On figures of this sort cyanoacrylate glue tends to be more reliable than glue intended for polystyrene; the manufacturer's instructions are binding.

It is a designation of the execution within the supplier's line, by which the individual variants are distinguished from one another. What this particular package contains is given in the instructions.

Last seen

SuyataSUSNS-0051:24

1:24 Sanshirou z Sengoku Ninja Girl Murasaki / Prime Body

A kit of a figure of a ninja by the name of Murasaki in 1:24 scale, the execution designated Prime Body. The parts are supplied to be assembled and painted.
In stock
15.16 €
1:72 Mi-24V 3D-Printed & coloured Interior on decal paper (Hobby Boss/ARK Models) (with 3D-printed resin parts)-25 %Stock ClearanceFavorite
Quinta StudioQD+721841:72

1:72 Mi-24V 3D-Printed & coloured Interior on decal paper (Hobby Boss/ARK Models) (with 3D-printed resin parts)

Mi-24V: color-printed cabin equipment in 1:72 with supplementary resin parts. For the attack helicopter in the version with separate bubble canopies.
Last one!of 4
18.36 €13.76 € You save 4.60 €
CMKCMK45171:48

1:48 B-26 Marauder External Gun Pack / for ICM kits

CMK 1:48 external gun pack for the B-26 Marauder is a 3D-printed resin set of machine guns, magazines and details for a faithful rendering of the gun installation on a model.
In stock
8.76 €
Quinta StudioQD486701:48

1:48 UH-1 D Early / H Early - 3D-Printed & Coloured Interior (for Kitty Hawk Kits)

UH-1D Early / UH-1H Early - 3D printed color interior (for the Kitty Hawk kit) is a pre-colored 3D printed cockpit set from Quinta Studio in 1:48 scale. It goes on like a wet decal but has real three-dimensional relief, so the cockpit looks photo-realistic without painting. It is not a model - it is a detail accessory for a kit that you have to own.
In stock
26.36 €
Quinta StudioQD351581:35

1:35 UH-1B 3D-Printed & coloured Interior on decal paper (Trumpeter)

The colored interior of the UH-1B Huey as photorealistic 3D decals in 1:35 scale from Quinta Studio. An accessory for the Trumpeter kit; it is not a model of the helicopter.
In stock
29.96 €
Hobby BossHB803351:48

1:48 Chinese People's Liberation Army Force J-5

J-5 of the Chinese People's Liberation Army 1:48 is a plastic kit of the Chinese version of the jet fighter from Hobby Boss in 1:48 scale.
In stock
19.16 €
Quinta StudioQD485701:48

1:48 Mi-24A 3D-Printed & coloured Interior on decal paper (Trumpeter)

The Quinta Studio 1:48 3D interior decal for the Mi-24A brings colored raised cockpit detail of the attack helicopter on a decal backing paper, applied the wet way.
In stock
25.56 €
1:48 Mi-28 3D-Printed & coloured Interior on decal paper (Arma Models) (small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS485841:48

1:48 Mi-28 3D-Printed & coloured Interior on decal paper (Arma Models) (small version)

Three-dimensional colored items for the pilot's space of the Mi-28 helicopter in 1:48 scale from Quinta Studio, the smaller variant of the set.
3 leftof 4
8.36 €6.28 € You save 2.08 €
HGWHGW1324091:32

1:32 Fokker Stitching - Relief Print

HGW Fokker – stitching imitation (Relief Print) 1:32 is a detail accessory for imitating the stitched seams of a fabric covering.
In stock
7.80 €
TrumpeterTR037221:200

1:200 USS Stevens (DD-479)

USS Stevens (DD-479) , the American Fletcher class destroyer as a plastic kit in the large 1:200 scale from Trumpeter. The finished model is roughly 57 cm long and captures Stevens in her unusual form with a catapult for a floatplane.
In stock
75.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.