Mi-24V: color-printed cabin equipment in 1:72 with supplementary resin parts. For the attack helicopter in the version with separate bubble canopies.
Responsibility details are not available.
The small scale places the hardest demands on interior equipment: there is little room, yet almost everything is visible through the glazing. The set therefore brings colored layered elements on backing paper for both crew stations and for the cargo cabin and adds small resin parts from three-dimensional printing. The shades match the finish of Soviet machines.
The version marked with the letter V became the most numerous form of the attack helicopter from the Mil design bureau. You can tell it from older machines by the two separate bulged canopies one above the other, which replaced the shared glazing, and by the radio-command guided anti-tank missiles on the end pylons of the wing. Under the nose sits a four-barrel machine gun in a movable turret. The combination of an armored attack machine with the ability to carry a squad to be dropped off has stayed unique in this class.
In 1:72 scale work exclusively with pointed tweezers and dose the glue with a pin. It is best to assemble and paint the inside of the fuselage before the halves are joined, otherwise the rear part is out of reach. Polish the glazing with a polishing compound, so that the result is not needlessly dull.
The fuselage, the rotor and the glazing are not the contents of this package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
