1:32 Hawker Typhoon Mk.Ib

Techmod 1:32 Hawker Typhoon Mk.Ib is a sheet of waterslide decals in 1:32 scale for a model of the British Typhoon fighter-bomber. It is an accessory for finishing a model, not a kit.

Scale1:32
Manufacturer Techmod
Product EAN8591111696487

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Techmod 1:32 Hawker Typhoon Mk.Ib — a decal set

A set of water-release decals from the Polish manufacturer Techmod in 1:32 scale, intended for a plastic model of the British Hawker Typhoon fighter-bomber in the Mk.Ib version. The decals serve to mark a model that is already built, painted and coated with a gloss varnish. The printing is done on a thin transparent carrier film, so that once dry the markings blend well with the surface of the model.

The real subject

The Hawker Typhoon came about as the intended successor to the Hurricane and was powered by the massive Napier Sabre H engine. It did not prove itself as a high-altitude fighter, but it excelled at very low levels, and so it gradually became one of the most effective attack aircraft of the Royal Air Force. The Mk.Ib version was armed with four cannons and carried unguided rockets or bombs under the wing. Machines of this version were deployed above all against ground targets and wore striking recognition stripes, which were meant to prevent them being mistaken for enemy aircraft of a similar silhouette.

Application tips

Before applying the decals, spray the model with a gloss varnish — on a matte surface air is trapped under the carrier film and a light frame appears around the marking. Cut the part out close to the artwork, dip it in lukewarm water and wait until the film releases by itself; only then slide it onto the model with a brush. Blot the excess water away with a paper towel and push the bubbles toward the edge. On large flat areas water is enough; on riveting and in places with engraved lines use a decal softener. Finally seal the model with a matte varnish according to the character of the surface of the real subject.

Who the set is for

  • Builders of British aircraft of the Second World War in the large 1:32 scale
  • Modelers who do not get on with thick or poorly printed decals from the box
  • Those who want to prepare alternative markings for a model that is already built
  • More experienced modelers working with large areas and fine detail

This is a separate set of decals. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, it is only a sheet of decals. The model has to be obtained separately.

A gloss surface is smooth and traps no air under the carrier film. On a matte varnish a light frame would appear around the marking.

Yes, as long as the surface is clean and coated with a gloss varnish where they are to be applied.

1:32 scale corresponds to large models of single-engine aircraft with a span of roughly forty centimeters.

Last seen

TechmodTECH320631:32

1:32 Hawker Typhoon Mk.Ib

Techmod 1:32 Hawker Typhoon Mk.Ib is a sheet of waterslide decals in 1:32 scale for a model of the British Typhoon fighter-bomber. It is an accessory for finishing a model, not a kit.
In stock
9.56 €
HäTHAT80171:72

1:72 Republican Romans - Princeps & Triari

HäT 1:72 Republican Romans - Princeps and Triari is a set of forty-eight figures of two lines of the Roman republican formation.
In stock
10.36 €
GunzeS015

S015 IJN Green (Nakajima) - (Semi Gloss) Spray

Mr.Color Spray IJN Green (Nakajima) is a semi-gloss lacquer spray from Gunze (40 ml) - the dark green of the upper surfaces of Japanese naval aircraft from the Nakajima factory.
In stock
9.16 €
Voyager ModelFE350171:35

1:35 WWII US Army Sherman AFV Simple Upgrade Set

The Sherman simple upgrade set 1:35 (Voyager Model) is a photo-etched detail accessory for American Second World War Sherman tanks. It is not a model but a set for improving a kit.
In stock
6.36 €
TrumpeterTR051071:35

1:35 US Coast Guard HH-65C Dolphin Helicopter

The plastic kit Trumpeter 1:35 US Coast Guard HH-65C Dolphin represents the rescue helicopter of the US Coast Guard in a large scale.
In stock
44.36 €
MARS ModelMARS720741:72

1:72 Polish "Paholki" (Thirty Years War)

MARS 1:72 Polish paholki of the Thirty Years War is a set of forty-eight figures in twelve poses.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.