1:32 Messerschmitt Bf-109K4 wheel bay paint masks

1:32 Messerschmitt Bf-109K4 wheel bay paint masks

10.36 €
Add to Cart

1:32 Messerschmitt Bf-109K4 wheel bay paint masks

Pre-cut masks for spraying the landing gear bays on a model of the Messerschmitt Bf 109K-4 fighter in 1:32 scale.

Scale1:32
Manufacturer QMT
Product EAN8591111000000

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Messerschmitt Bf 109K-4 was the last series-built version of the most numerous German fighter of the Second World War. It differed from the older configurations in revised covers and in other details of the airframe, and it reached the units only in the very last part of the war. In 1:32 scale even the fine surface detail stands out on a model, so it pays to give attention to the places that are clearly visible once the build is complete, and the open landing gear bays are among them.

What the masks are for

The set contains masks for spraying the landing gear bays of a model of the Bf 109K-4 in 1:32 scale. The masks are pre-cut to a shape matching the parts of a particular kit, so the tedious cutting of masking tape falls away and the color transition comes out sharp along the whole length of the edge. Which kit they are cut for should be checked against the manufacturer's data on the packaging and in the instructions, because the shape differs from one manufacturer to another.

Usage tips

The masks are placed on the surface before spraying, never onto paint that has already dried. The surface has to be clean and degreased, otherwise the edge of the mask lifts and the paint creeps under. Press the mask down along the whole edge with a blunt toothpick and apply the paint in several thin coats perpendicular to the edge, so that it does not get under it. Lift the masks off carefully, before the paint has fully cured, and by pulling sideways, not upward. Under the mask an exact transition stays that only needs a light cleaning up at most.

Terms of supply

The package contains the masks stated. The kit, the paints and the thinner are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Masks for spraying the landing gear bays of a Bf 109K-4 model in 1:32 scale. The kit and the paints are not included in the delivery.

They are cut for a model of the Bf 109K-4 in 1:32 scale. The specific target kit is stated by the manufacturer on the packaging and in the instructions, so check it before buying.

Before spraying, onto a clean and degreased surface. After spraying they are lifted off before the paint has fully cured.

Press the mask down along the whole edge and apply the paint in several thin coats perpendicular to the edge, not in one heavy coat.

Last seen

QMTQMTM320251:32

1:32 Messerschmitt Bf-109K4 wheel bay paint masks

Pre-cut masks for spraying the landing gear bays on a model of the Messerschmitt Bf 109K-4 fighter in 1:32 scale.
In stock
10.36 €
1:48 F-4B seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE12131:48

1:48 F-4B seatbelts STEEL

Photo-etched steel seat belts in 1:48 for the F-4B from the Czech manufacturer Eduard. They replace the plastic or printed belts in the cockpit of a model.
Last one!of 3
8 €6 € You save 2 €
Tetra Model WorksSE-700251:700

1:700 IJN Destroyer Sagiri 1941 for YamashitaHobby

A detail set for a model of the Japanese destroyer Sagiri as of 1941, 1:700 scale is an accessory for a kit you already own, not a ship model on its own. The metal parts replace simplified plastic elements of the superstructure.
In stock
12.76 €
EduardFE12371:48

1:48 Douglas SBD-5 Dauntless seatbelts STEEL

1:48 Douglas SBD-5 Dauntless seatbelts STEEL are Eduard photo-etched seat belts for the cockpit of a model of the carrier-based dive bomber in 1:48 scale.
In stock
8 €
AMMO of Mig JimenezA.MIG-8240

SOFTOUCH VELVET MASKING TAPE 1 (2mm X 25M)

Softouch Velvet Masking Tape 1 (2 mm x 25 m) is a fine flexible masking tape for modelers. The narrow 2 mm width suits thin dividing lines and rounded camouflage transitions.
In stock
2.36 €
ReskitRSU48-01661:48

1:48 F-111A/E Cockpit with 3D decals for HobbyBoss

Reskit F-111A/E cockpit with 3D decals, 1:48 is a 3D-printed replacement set for the pilot's compartment of F-111A/E strike bomber models. It is a demanding detail accessory for the Hobby Boss kit, not an airplane kit.
In stock
57.16 €
Special MaskM720151:72

1:72 P-40E/K/Kittyhawk Mk.Ia/Mk.III Mask

Mask 1:72 P-40E/K and Kittyhawk Mk.Ia/Mk.III is a die-cut masking set for the cockpit glazing. It serves as an accessory for a build; it is not a kit.
In stock
4.36 €
Special MaskM720251:72

1:72 Tachikawa Ki-54 Hei / Hickory MASK

Special Mask 1:72 Tachikawa Ki-54 Hei / Hickory is a set of precisely pre-cut masking stencils in kabuki tape for painting the cockpit glazing and the wheel hubs easily and cleanly.
In stock
4.36 €
1:32 Curtiss P-40E Kittyhawk exterior-25 %Stock ClearanceFavorite
EduardED324551:32

1:32 Curtiss P-40E Kittyhawk exterior

Eduard 1:32 Curtiss P-40E Kittyhawk exterior is a photo-etched set in bare brass sheet, aimed at the outer surface of the aircraft - that is, not at the cockpit and not at the gun bays. It is an accessory for a kit, not a model.
Last one!
17.60 €13.20 € You save 4.40 €
1:48 McDonnell-Douglas AV-8A Harrier early-25 %Stock ClearanceFavorite
EduardFE11641:48

1:48 McDonnell-Douglas AV-8A Harrier early

Photo-etched metal parts for a model of the AV-8A Harrier aircraft in the early treatment in 1:48 scale.
8 leftof 10
9 €6.76 € You save 2.24 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.