Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO
1:35 IDF NAGMACHON EARLY, CONVERSION SET FOR IDF NAGMASHOT

1:35 IDF NAGMACHON EARLY, CONVERSION SET FOR IDF NAGMASHOT

34.76 €
Add to Cart

1:35 IDF NAGMACHON EARLY, CONVERSION SET FOR IDF NAGMASHOT

IDF Nagmachon, early version - a conversion set from the Nagmashot in 1:35 scale from the manufacturer ELEFANT. A resin conversion set that turns a model of the Nagmashot into an early Nagmachon.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

34.76 €
28.73 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

IDF Nagmachon, early version - conversion set, 1:35 (ELEFANT)

A conversion set in 1:35 scale intended for rebuilding a model of the Israeli heavy armored personnel carrier Nagmashot into the early form of the Nagmachon. It is not a complete vehicle kit - the set supplies only the parts that distinguish the two versions and assumes that you obtain the basic model separately. A conversion of this extent also means cutting into the plastic of the basic kit, so expect sawing and sanding.

The real subject

Both the Nagmashot and the Nagmachon are based on the chassis of the Centurion tank, which Israeli workshops rebuilt after its retirement from tank service into a heavily armored personnel carrier for engineer and combat tasks in built-up terrain. The Nagmachon differs from the older Nagmashot above all in the treatment of the upper part of the hull - a superstructure around the commander's and gunners' positions that gave the crew cover while firing from behind the outline of the vehicle. The early version has this superstructure lower and simpler than the later form in which the vehicle is usually portrayed.

Building and painting tips

First try the whole set dry on the basic hull and only then cut off the plastic parts that have to give way. Rinse the resin castings in lukewarm water with detergent to remove any residue of mold release agent - without that the paint will peel off. Cut the casting blocks off with a saw or a cutting disc and level the surface on abrasive paper laid on glass, so that it seats flat. A joint between resin and plastic holds only with cyanoacrylate glue; secure larger parts with a wire pin. Sand resin wet and with your airways protected. Once finished, unify the whole model with a primer, otherwise the different substrates will show in the shade.

Who the set is for

  • Modelers of Israeli armor in 1:35 scale
  • Builders who want the early version of the Nagmachon, different from the commonly built later form
  • More experienced modelers with experience of resin and of conversions
  • Collectors who build the development line of vehicles on the Centurion chassis

The set is a conversion accessory, not a kit in its own right. It is supplied unpainted; glue, paints and the basic model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The set contains only the parts needed for the conversion; the basic Nagmashot model has to be obtained separately.

Yes, expect that with a conversion of this extent. Parts of the original hull have to be removed so that the new parts seat. We recommend a dry fit first.

Above all in the treatment of the superstructure above the hull - the early form is lower and simpler. Later versions have a taller and markedly bulkier superstructure.

With cyanoacrylate glue. Plastic cement does not bite into resin and the joint would not hold. Larger parts are worth securing with a wire pin.

Last seen

ELEFANTEL350181:35

1:35 IDF NAGMACHON EARLY, CONVERSION SET FOR IDF NAGMASHOT

IDF Nagmachon, early version - a conversion set from the Nagmashot in 1:35 scale from the manufacturer ELEFANT. A resin conversion set that turns a model of the Nagmashot into an early Nagmachon.
In stock
34.76 €
1:48 P-51D 110gal fuel tank
-20 %
Favorite
EduardED6485311:48

1:48 P-51D 110gal fuel tank

Eduard 1:48 P-51D - 110 gal drop tanks is a resin set of underwing fuel tanks for the famous Mustang escort fighter in 1:48 scale.
In stock
10.40 €8.32 € You save 2.08 €
HatakaHTK-AS15

Swiss Air Force Paint Set (WW2 period)

Eight shades for Swiss aircraft of the 1930s and 1940s. It covers silver biplanes, the dark German scheme and the varied four-color pattern of 1938.
In stock
17.96 €
GasPatch modelsGP23-352991:35

1:35 British Water Cans 1944 (12 pcs)

British water containers dated 1944 in 1:35 scale belong with the equipment of the closing phase of the war in western Europe.
In stock
13.96 €
1:72 P-51D Mustang - interior 3D decals for Tamiya kit
-20 %
Favorite
KelikRSK72-02011:72

1:72 P-51D Mustang - interior 3D decals for Tamiya kit

Kelik 1:72 P-51D Mustang cockpit interior 3D decals are color relief 3D decals for faithful detailing of the pilot's compartment of P-51D models. The decals are intended for the Tamiya kit.
In stock
11.16 €8.93 € You save 2.23 €
1:48 Ilyushin IL-2 Sturmovik LööKplus-25 %Stock ClearanceFavorite
EduardED6440711:48

1:48 Ilyushin IL-2 Sturmovik LööKplus

Eduard LööKplus 1:48 Ilyushin Il-2 Shturmovik is a combined set of resin accessories, not a kit. It raises the standard of detail of the cockpit and of other areas of a model in 1:48 scale.
7 leftof 9
23 €17.24 € You save 5.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.