SX-Art masking stencils for the T-90MS tank in 1:35 scale are self-adhesive masks with which a motif is sprayed onto a model in paint instead of a decal being stuck on.
Responsibility details are not available.
This is a set of self-adhesive masking stencils, not a kit. The stencils are stuck to the already painted and perfectly cured surface of a model of the Russian T-90MS tank, oversprayed with a second color and taken off once dry. The resulting motif is thus formed directly by paint and not by the film of a decal. The set is made for a particular subject in 1:35 scale, so the shapes fit the forms of that vehicle.
A decal lies on the surface as a thin layer and even after treatment with a softener a glossy edge often remains after it, which is visible above all on a matte finish. A sprayed motif does not have this problem, stands varnishing, a wash and pigments without risk and is in no danger of silvering. Masks also come into their own where a decal would seat poorly over rivets, gaps or curved surfaces.
The base must be smooth and fully cured, otherwise a mask will tear the paint away when removed. Reduce the tack of a stencil beforehand by laying it briefly on clean cloth. Apply the paint thinned, in several very thin coats and with an airbrush at a low pressure, so that it does not run under the edge. Take the stencils off shortly after the paint has set, with tweezers and at a sharp angle to the surface. Reckon with single use.
The package contains the masking stencils alone. A model, paints and thinners are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
