Turned metal barrels of the American 8 inch (20.3 cm) naval gun of the Mark 12 type for models in 1:350 scale.
Responsibility details are not available.
The Mark 12 gun of 8 inch caliber was the main armament of American heavy cruisers. The figure 55 after the slash does not denote the caliber but the barrel length expressed in multiples of the caliber, so the barrel measures fifty-five bore diameters. That is where its conspicuous slenderness comes from, and a model has to keep it if the gun is to look right.
These are turned metal parts. Turning holds a precise circular cross-section and axis along the whole length, which on a long thin barrel is apparent at first glance: it does not slacken, it does not sag and it has no longitudinal seam. Metal also stands up to handling of a finished model better than a thin plastic part, which bends or breaks off easily.
Cut the plastic barrel off as close to the turret as possible, true up the face with a file and drill a hole in the middle to the diameter of the pin of the metal barrel. Drill slowly and dry, so that the plastic does not melt. Glue the barrel in with cyanoacrylate glue and check the elevation angle at once from the side as well as from above, while the position can still be adjusted. Before painting, degrease the metal and spray a primer, otherwise it rubs off the smooth surface.
The set suits modelers who are working on precisely the gun turrets of ship models and want barrels as thin as those on the real subject, and equally for repairing a barrel that has broken off. Check the number of pieces in the package and the kit they are intended for in the manufacturer's material. The model of the ship, paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!