1:48 Canadian F-35 Lightning-II wheels

A set of resin wheels for the Canadian F-35 Lightning II in 1:48 scale from Armory. An accessory for building a model that will replace the plastic landing gear wheels.

Scale1:48
Manufacturer Armory
Product EAN8591111695855

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Resin wheels for the Canadian F-35 Lightning II in 1:48 scale (Armory)

An accessory set cast in resin for models in 1:48 scale. It replaces the landing gear wheels, which in injection-molded kits are usually split into halves. This is the form for the Canadian machines, which the manufacturer lists separately from the sets for the individual base versions of the aircraft. The set contains no other part of the model.

The real subject

The F-35 Lightning II is a single-engined single-seat combat aircraft of the current generation, built in three base forms that differ in the way they take off and land and in their adaptation for land or carrier use. Canada is among the countries bringing this type into service. The landing gear is of the nosewheel arrangement and the main wheels are clearly apparent on a parked aircraft.

Detail that shows

Modern machines tend to have clean surfaces and few protrusions, so a finished model stands or falls on the small things: the right edge of the cockpit, the pylons and precisely the landing gear. A resin wheel with no split seam and a crisply cast hub helps more here than on an aircraft whose surface is full of rivets and antennas. At the same time it saves filling the tread, where sanding would wipe the pattern away.

Painting and patina

With current aircraft it pays to keep the weathering in check. Spray a primer, then the hub shade, mask it with a circular mask and finish the tire in dark gray. Heavy dust and mud do not belong on wheels operated from prepared surfaces; a very fine light dusting on the tread and an unobtrusive darkening where it meets the base are enough.

Who the set is for

  • modelers building the F-35 in 1:48 scale
  • anyone interested in the Canadian form of the machine
  • builders who object to the seam around the circumference of plastic wheels
  • modelers with basic experience of resin parts

The set is an accessory for building a model, not a standalone model. It is supplied unpainted; paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer lists the sets separately for the individual base forms of the aircraft and this Canadian one on its own. When choosing, go by the box of the set.

It is not. It is an accessory that replaces the plastic landing gear wheels during the build. You need to have your own model of the aircraft.

Apply primer, spray the hub shade, mask the hub with a circular mask and finish the tire in dark gray. Keep the weathering very restrained, as heavy dusting does not suit a current machine.

Cyanoacrylate-based super glue. Polystyrene cement does not attack resin and the joint would not hold.

Last seen

ArmoryARAW483051:48

1:48 Canadian F-35 Lightning-II wheels

A set of resin wheels for the Canadian F-35 Lightning II in 1:48 scale from Armory. An accessory for building a model that will replace the plastic landing gear wheels.
In stock
6.76 €
1:350 THE PLA Navy Type 051C DDG-115 Shenyang-25 %Stock ClearanceFavorite
TrumpeterTR045291:350

1:350 THE PLA Navy Type 051C DDG-115 Shenyang

PLA Navy Type 051C DDG-115 Shenyang 1:350 is an injection-molded plastic kit of the Chinese guided missile destroyer from the manufacturer Trumpeter.
Last one!
29.96 €22.48 € You save 7.48 €
LifecolorLIFUA636

UA636 - Royal Navy WWII Dark Blue-Grey B5

The darkest of the British naval blue-gray tones is offered by Royal Navy WWII Dark Blue-Grey B5 from the Lifecolor acrylic range. A water-based acrylic paint for the dark fields of the camouflage schemes of ship models.
In stock
2.76 €
DK DecalsDK720891:72

1:72 Boeing B-17F/G Flying Fortress 15th Air Force

DK Decals 1:72 Boeing B-17F/G Flying Fortress 15th Air Force is a decal set for models of the heavy bomber B-17 as used in Italy.
In stock
15.16 €
1:35 Pz.Kpfw.III Ausf.J UPGRADE SOLUTION SERIES-25 %Stock ClearanceFavorite
RYE FIELD MODELRM20051:35

1:35 Pz.Kpfw.III Ausf.J UPGRADE SOLUTION SERIES

1:35 Pz.Kpfw.III Ausf.J Upgrade Solution Series is an add-on set of parts for improving a model of the German medium tank in 1:35 scale from the manufacturer Rye Field Model. It is not a kit of the tank.
9 leftof 13
16.76 €12.56 € You save 4.20 €
Mark IDMK144941:144

1:144 RAAF Low-vis roundels, 2 sets insignia diameters: 18,22,24,36

Mark I 1:144 RAAF Low-vis roundels is a decal sheet with low-visibility national insignia of the Royal Australian Air Force, two sets in four diameters.
In stock
2.76 €
AberABRPS3

Polystyrene plates 195 x 315 x 0,75 mm x 3 pcs.

Polystyrene sheets 0.75 mm from Aber: three sheets measuring 195 by 315 mm for load-bearing parts and conversions.
In stock
5.56 €
1:48 WWII USAAF oxygen tank G-1 3D PRINTED-25 %Stock ClearanceFavorite
EduardED6488101:48

1:48 WWII USAAF oxygen tank G-1 3D PRINTED

A G-1 type oxygen tank of the US Army Air Forces in 1:48 scale is a 3D printed resin accessory from Eduard. It fills out aircraft interiors and airfield scenes; it is not a model.
2 leftof 3
6.80 €5.12 € You save 1.68 €
Artwox ModelAM200321:700

1:700 USS Missouri BB-63 Deck Masking Sheet for Meng Model PS004

Masking sheets for the deck of the battleship Missouri BB-63 in 1:700 scale from Artwox Model bound the deck surfaces during spraying. It is not a ship model but an accessory for a kit.
In stock
6.36 €
Titans HobbyTTH332

The Wall - Special High Density Foam (350 x 250 x 6 mm)

Titans Hobby The Wall - special high density foam, 6 mm thick is a rigid modeling foam in a 35x25 cm sheet for building houses, walls and terrain.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.