29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 MiG-25 RB/RBT. Jet nozzles (ICM)

Resin engine nozzles for the MiG-25 RB and RBT model in 1:48 scale from Metallic Details. A replacement for the simplified plastic parts; it is not an aircraft kit. Intended kit: ICM.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111713184

Responsibility details are not available.

18.36 €
15.17 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-25 RB/RBT, engine nozzles in 1:48 scale

This detail set from Metallic Details replaces the exhaust sections of the engines of the MiG-25 model in the RB and RBT versions with more accurate resin castings in 1:48 scale. The set is fairly extensive, as the nozzles are built up from several parts, so the internal structure and the thin edges of the segments that injection-molded plastic cannot manage are captured as well. It is an aftermarket accessory and the aircraft model is not included in the package. The castings are shaped for the ICM kit.

The real subject

The MiG-25 is a Soviet heavy twin-engine aircraft designed for high-speed flight at great altitude. An airframe largely of welded steel, twin vertical tail surfaces and massive side intakes were the answer to fast, high-flying targets. The RB and RBT versions are reconnaissance and bomber modifications: they carry reconnaissance equipment in the nose and differ in external fit from the fighter versions. On this aircraft the nozzles of both engines form a prominent part of the tail and are fully on show from behind.

Building and painting tips

Wash the castings in warm soapy water, cut the casting blocks off with a saw or a cutting disc and level the mating faces by wet sanding with respiratory protection. It is bonded with super glue (cyanoacrylate). Assemble and paint the nozzles away from the model and glue them on only at the end. A metallic look comes out best on a smooth base: a primer, fine sanding, a metallic shade and then toning of the individual segments. Darken the inside with a wash and soot, and suggest heat staining on the outer surface with heavily thinned paint applied in thin coats.

Who the set is for

  • modelers building the reconnaissance versions of the MiG-25 in 1:48 scale
  • builders who want to sharpen up the tail of the model
  • more experienced modelers working with resin
  • anyone after contest standard detail

The accessory is supplied unassembled and unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, this is only a detail set of nozzles that is added to a plastic kit you have already bought.

The reconnaissance and bomber versions RB and RBT in 1:48 scale.

Metallic paints need a smooth base: apply a primer, sand it with the finest paper and only then spray the metallic shade.

Cyanoacrylate glue; plastic cement will not hold.

It is intended for the ICM kit.

Last seen

Mettalic DetailsMDR48261:48

1:48 MiG-25 RB/RBT. Jet nozzles (ICM)

Resin engine nozzles for the MiG-25 RB and RBT model in 1:48 scale from Metallic Details. A replacement for the simplified plastic parts; it is not an aircraft kit. Intended kit: ICM.
In stock
18.36 €
AberABR160381:16

1:16 Tiger II Vol.5 - Front Fenders

Aber 1:16 Tiger II Vol.5 – Front Fenders is a photo-etched set of front fenders for a large scale model of the Tiger II heavy tank.
In stock
20.40 €
EduardFE14021:48

1:48 Mil Mi-17 seatbelts STEEL

Mil Mi-17 seatbelts STEEL 1:48 are photo-etched seat belts of steel for a model of the helicopter. They replace missing or coarse belts in the cabin and are added to a kit acquired separately.
In stock
6.80 €
AiresAIR47461:48

1:48 Hawker Sea Fury FB.11 cockpit set

Resin Hawker Sea Fury FB.11 cockpit 1:48 (Aires) is a resin detail set that replaces the plastic cockpit with a faithful replica, including the instrument panel and the belts.
In stock
16.80 €
Quinta StudioQD322081:32

1:32 P-40F WarHawk 3D-Printed & coloured Interior on decal paper (Trumpeter)

P-40F Warhawk, colored 3D interior 1:32 is a set of raised cockpit details on a carrier decal paper for models of this American fighter. Target kit: Trumpeter.
In stock
20.76 €
DN ModelsDN72/827-0231:72

1:72 Camouflage Paint Masks For Splinter F-16C 64th Aggressor Squadron

1:72 Camouflage Paint Masks For Splinter F-16C 64th Aggressor Squadron are DN Models painting masks for the blue broken finish of the aggressor F-16Cs from Nellis in Nevada.
In stock
17.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.