1:72 DH. 100 Vampire Mk 1+ vacu canopies - Amodel

1:72 DH. 100 Vampire Mk 1+ vacu canopies - Amodel

12.36 €
Add to Cart

1:72 DH. 100 Vampire Mk 1+ vacu canopies - Amodel

Pavla models 1:72 DH.100 Vampire Mk.1 with vacuum-formed canopies is an accessory set for a plastic kit of the first British jet fighter, not a model in its own right.

Scale1:72
Manufacturer Pavla models
Product EAN8591111000000

Responsibility details are not available.

12.36 €
10.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

DH.100 Vampire Mk.1 with vacuum-formed canopies 1:72 (Pavla models)

This item is not an aircraft kit but an accessory set for modelers who want to raise the quality of a kit in 1:72 scale they have already bought. Besides resin parts it contains vacuum-formed canopies, that is, transparent parts shaped from thin clear film. Compared with the injection-molded canopy from the box they are noticeably thinner and give a better view into the inside of the fuselage, which shows immediately in a small scale. The model, glue and paints are not included in the package.

The real subject

The de Havilland DH.100 Vampire was one of the first British jet aircraft brought into service. Its twin-boom tail structure with a short fuselage nacelle housing a centrifugal-flow engine is characteristic. Mk.1 designates the first production version, which reached the squadrons shortly after the Second World War and became a transitional type between piston fighters and a full jet generation.

Building and painting tips

Cut the vacuum-formed canopy out with a generous margin and sand it down to its final shape on fine sandpaper laid on a flat board. It is attached with PVA glue or a special glue for glazing, never with cyanoacrylate, which would fog the clear part. Mask the edges of the frames beforehand so that you get a sharp transition. Wash the resin parts free of mold release agent residue, cut the casting blocks off with a saw and sand them with respiratory protection. It is practical to fit the canopy only after the interior has been painted and the clear coat has dried.

Who the set is for

  • Modelers who build the Vampire Mk.1 in 1:72 scale and want finer glazing
  • Those interested in early jet aircraft of British design
  • Builders with experience of resin and vacuum-formed parts
  • Those who want to finish the model with the cockpit open

The accessory set is supplied unassembled and unpainted. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an accessory set for a plastic Vampire Mk.1 kit in 1:72 scale that you have already bought. You will not find the model itself in the package.

A transparent part shaped by vacuum from thin clear film. It is more delicate than the injection-molded canopy from the box, but it calls for careful cutting out and sanding of the edge.

With PVA glue or a special glue for glazing. Cyanoacrylate glue would fog the clear material and that defect can no longer be removed.

Working with a vacuum-formed part and resin is more demanding than an ordinary build in plastic. We recommend it to modelers who have already worked with similar material.

Last seen

Pavla modelsC721001:72

1:72 DH. 100 Vampire Mk 1+ vacu canopies - Amodel

Pavla models 1:72 DH.100 Vampire Mk.1 with vacuum-formed canopies is an accessory set for a plastic kit of the first British jet fighter, not a model in its own right.
In stock
12.36 €
PeewitPWM721211:72

1:72 SB2A-3 Buccaneer / Bermuda Mk.I pro stavebnici Special Hobby

Peewit 1:72 SB2A-3 Buccaneer / Bermuda Mk.I is a die-cut self-adhesive masking set for spraying the canopy framing of a model of the American Brewster SB2A dive bomber cleanly.
In stock
5.16 €
FujimiFU036961:24

1:24 Toyota MarkII Grande Twincam24

Fujimi 1:24 Toyota Mark II Grande Twin Cam 24 is an injection-molded plastic kit of the Japanese sedan, to be assembled and painted.
In stock
19.96 €
Quinta StudioQT320331:32

1:32 RBK-500 AO-2.5 RTM (version with nose fairing) Cluster Bombs, 2 pcs (for all kits)

RBK-500 AO-2.5 RTM cluster bombs with a nose fairing, 2 pieces, 1:32 is a set of two printed resin RBK-500 cluster bombs with an aerodynamic nose fairing in 1:32 scale.
In stock
13.56 €
GAS HANSGH-AIR480041:48

1:48 Hawker Hurricane Landing Lights

The Hawker Hurricane Landing Lights detail set from the manufacturer GAS HANS in 1:48 scale: refined landing lights (resin 3D printed and clear parts). It is not a model but an accessory that requires a basic kit.
In stock
9.16 €
AiresAIR47531:48

1:48 MiG-27 early exhaust nozzle - opened

Aires 1:48 MiG-27 early exhaust nozzle - opened is a resin replacement for the exhaust nozzle of the early MiG-27 version, cast in the open position. It is an accessory for a model, not a kit of an aircraft.
In stock
20.80 €
Mini Craft CollectionMCC48051:48

1:48 HTY-5 Ejection Seats for J-10S (2 pcs)

HTY-5 ejection seats for the J-10S (2 pieces) are a 3D-printed resin detail set in 1:48 scale for a more accurate cockpit on the two-seat fighter.
In stock
14.76 €
ValomVAL721601:72

1:72 DH.91 Albatross (Franklin, Faraday)

DH.91 Albatross (Franklin, Faraday) is a plastic kit of the British four-engine airliner in 1:72 scale from the Czech manufacturer Valom.
In stock
42.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.