1:72 Ki-61 Hien Fabric Effect Airbrush Masks

Airone Hobby 1:72 Ki-61 Hien airbrush masks for a fabric covering effect are a modeling accessory for spraying a fine rib pattern onto the moving surfaces. It is not a kit and it is not a decal sheet.

Scale1:72
Manufacturer Airone Hobby
Product EAN8591111693707

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ki-61 Hien Fabric Effect Masks in 1:72 Scale (Airone Hobby)

This set of self-adhesive, machine-cut masks is used to spray a fabric covering effect onto a model of the Japanese Ki-61 Hien fighter in 1:72 scale. It is not an airplane model and it is not a decal sheet: it is a painting aid that adds a fine pattern of ribs and the bays between them to a finished paint job, the way a fabric-covered surface looks on the real aircraft.

The real subject

The Kawasaki Ki-61 Hien was a Japanese fighter of the Second World War, unusual among contemporary Japanese types for its liquid-cooled V12 engine and slim fuselage; the Allies used the code name Tony for it. On aircraft of this generation the rudders, elevators and ailerons had a metal frame covered with fabric. The covering sagged slightly between the ribs, so a regular rhythm of ribs and shallow bays shows on the surface. In small scales this is a detail that gives the surface of the model scale credibility far more cheaply than replacing parts.

Usage tips

Apply the masks only to a fully cured base color, otherwise the paint will lift when they are removed. Clean the surface of dust and grease first and press the mask down with a soft stick or tweezers all around its edge. Spray thinly thinned paint in a slightly darker or lighter tone, at low pressure and in several light coats, perpendicular to the surface: the less paint, the finer the result. Remove the mask shortly after the paint has dried, while the coat is still flexible, and pull it at an angle over the edge, not straight up. Finally, blend the transitions with a light overspray of the base color and seal the whole surface with varnish before applying the decals.

Who the set is for

  • modelers who build Japanese fighters in 1:72 scale
  • anyone interested in a realistic finish on the moving surfaces without cutting and filling
  • builders who are already at home with an airbrush and with light coats
  • collectors who want to set their models apart by the finish of the surface

This is a painting aid. The model, the paints and the varnish are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masks for painting, used on an already built model of the Ki-61 Hien in 1:72 scale.

Yes, the set is designed for spraying light, thinly thinned coats. A brush can hardly give a transition as fine as this.

Count on single use rather than repeated use: the tack drops after the first removal and the mask then seats less well all around its edge.

Shortly after the paint has dried, while the coat is still flexible. On a fully cured finish the paint under the edge of the mask may lift with it.

Last seen

Airone HobbyAHF720171:72

1:72 Ki-61 Hien Fabric Effect Airbrush Masks

Airone Hobby 1:72 Ki-61 Hien airbrush masks for a fabric covering effect are a modeling accessory for spraying a fine rib pattern onto the moving surfaces. It is not a kit and it is not a decal sheet.
In stock
3.96 €
Kopecky Scale ModelsKSM320101:32

1:32 F-35A Exhaust Nozzle For Italeri

The engine exhaust nozzle for a model of the fifth-generation aircraft from the Italeri kit in 1:32, cast in resin including the inner vault and the outer flaps.
In stock
24.76 €
ReskitRSM72-00031:72

1:72 Yak-1B Painting Masks for Arma Hobby kit

Reskit masking set Yak-1B in 1:72 scale - self-adhesive masks for cleanly painting the canopy frames of the Yak-1B fighter.
In stock
4.76 €
CMKF721591:72

1:72 German crew for AA-gun 3,7 for Revell Schnel

CMK 1:72 Crew for the 3.7 cm antiaircraft gun is a resin set of three gunner figures for manning the shipboard flak of a German fast attack craft.
In stock
10.76 €
ReskitRS72-05821:72

1:72 R-27ET (AA-10 Alamo-D) missiles (4 pcs)

Reskit 1:72 R-27ET (AA-10 Alamo-D) missiles (4 pieces) is a resin, 3D-printed set of four air-to-air guided missiles for detailing models of Russian and Soviet fighters.
In stock
10.76 €
AiresAIR20971:32

1:32 P-51B/C Mustang gun bay

Aires 1:32 P-51B/C Mustang gun bay is a resin set of the wing gun bay for a model of the P-51B/C Mustang aircraft. It is an accessory for a kit, not an aircraft model.
In stock
20.80 €
STRIPS 1.50 X 5.00 X 350MM – STYRENE STRIP – (9 UNITS)-25 %Stock ClearanceFavorite
AK interactiveAK6528

STRIPS 1.50 X 5.00 X 350MM – STYRENE STRIP – (9 UNITS)

Styrene strip 1.5 x 5.0 x 350 mm from AK interactive is a wide polystyrene strip in a package of 9 pieces for planks, ramps and wide edging.
2 leftof 10
5.16 €3.88 € You save 1.28 €
Aires/QuickboostQB723421:72

1:72 F9F-2 Panther wing fence

Resin wing fences for the F9F-2 Panther in 1:72 scale from Quickboost. Replacement parts for the wing, not an airplane model.
In stock
2.76 €
Tetra Model WorksSE-700241:700

1:700 IJN Destroyer Amagiri 1943 for YamashitaHobby

A detail set for a model of the Japanese destroyer Amagiri as of 1943, 1:700 scale is an accessory for a kit you already own, not a ship model on its own. The metal parts replace simplified plastic elements of the superstructure and the deck.
In stock
12.76 €
STRIPS 0.30 X 4.00 X 350MM – STYRENE STRIP – (10 UNITS)-25 %Stock ClearanceFavorite
AK interactiveAK6505

STRIPS 0.30 X 4.00 X 350MM – STYRENE STRIP – (10 UNITS)

Styrene strip 0.30 x 4.00 x 350 mm from AK interactive is a pack of ten thin plastic strips from which you can make paneling, trim and missing small parts on a model.
12 leftof 15
5.16 €3.88 € You save 1.28 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.