1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks

1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks

6.76 €
Add to Cart

1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks

QMT 1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks is a masking set for painting the wheel bays of a model of the British Phantom in 1:72 scale, in the variant designated New.

Scale1:72
Manufacturer QMT
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

QMT 1:72 Phantom FG.1 and FGR.2 masking set, the New variant

The set contains self-adhesive masks cut to the shape of the wheel bays of a model of the British Phantom in 1:72 scale. It is not a kit, nor is it a resin accessory, but an aid to painting. The name carries the suffix New, by which the manufacturer distinguishes this variant of the die-cut from an older variant of the same set.

British Phantoms are different from American ones

The FG.1 and FGR.2 versions were adapted for British service and differed from the American machines in their powerplant and in a number of changes to the airframe that the different engine installation called for. For a modeler that means accessories cut for the American versions need not fit, and the other way round. This set is cut precisely for the British FG.1 and FGR.2.

Preparing the surface before the mask is applied

Apply a mask only onto a surface that is clean, degreased and completely dry. Fingerprints leave a greasy film on which the adhesive of the mask does not hold, and that is exactly where the paint then creeps under. Before masking it pays to wipe the model with a soft cloth and let it rest for a while. Lift the mask from the backing sheet with tweezers, not with your fingers, and seat it from the center toward the edges so that no air bubble stays under it.

Painting tips, and who the set is for

Spray the interior of the bay first, mask once it is dry and only then spray the outer finish in thin coats. Check the shades in the instructions to your own kit, as the set does not prescribe them.

  • builders of the British Phantom versions in 1:72 scale
  • modelers who want a sharp transition between the bay and the skin
  • those who care about preparing the surface before masking
  • builders looking for a finished die-cut instead of cutting tape by hand

This is an accessory to a kit. The model itself, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer uses it to distinguish this variant of the die-cut from an older variant of the same set, which carries the suffix Old. Compare the actual difference in the die-cut against the illustration on the packaging of the two sets.

The set is cut for the British FG.1 and FGR.2 versions. Separate sets are sold for the American versions.

Onto a clean, degreased and dry surface, with tweezers, from the center toward the edges. Finally press the edge down around the whole perimeter.

Last seen

QMTQMTM720101:72

1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks

QMT 1:72 McDonnell-Douglas FG.1/FGR.2 Phantom New wheel bay paint masks is a masking set for painting the wheel bays of a model of the British Phantom in 1:72 scale, in the variant designated New.
In stock
6.76 €
EduardED333881:32

1:32 PANAVIA Tornado GR.1 - Steel Seatbelts (for Italeri Kits)

Steel photo-etched harness belts for the crew of the Panavia Tornado GR.1 in 1:32 scale, intended for the Italeri kit.
In stock
13.80 €
ValomVAL720911:72

1:72 Fouga CM.170R Magister (AAF, Brazil)

Valom 1:72 Fouga CM.170R Magister (AAF, Brazil) is a plastic kit of the French jet trainer in 1:72 scale with Brazilian Air Force markings.
In stock
15.60 €
TrumpeterTR056081:350

1:350 USS CV-2 Lexington carrier 05/1942

Plastic kit of the American aircraft carrier USS Lexington CV-2 in her May 1942 condition, in 1:350 scale from Trumpeter.
In stock
70.36 €
Pavla modelsM35121:35

1:35 76mm cal. Ammunition U.S.WW.II

Resin set of American 76 mm tank ammunition of the Second World War in 1:35 scale from Pavla Models. A detailed accessory for dioramas and interiors, not a standalone model.
In stock
2 €
EduardED6443301:48

1:48 Republic P-47 D Razorback - 3D-Printed Cockpit for Miniart

Eduard 1:48 Republic P-47D Razorback 3D-printed cockpit is a detailed 3D-printed cockpit set for a model of the American P-47 Thunderbolt fighter in the Razorback form.
In stock
10.40 €
Mr.PaintMRP-A014

MRP-A014 Dark Aluminium

Mr.Paint MRP-A014 Dark Aluminium is a water-thinnable acrylic metallic from the MRP Aqua line, a dark aluminum shade for metal surfaces and panels.
In stock
3.16 €
Siam ScaleSSN320281:32

1:32 Lockheed T33 T-bird (RTAF)

The 1:32 Lockheed T-33 decal sheet in Royal Thai Air Force colors is an accessory for a kit you already own, not a model. It lets you finish a model of the two-seat jet trainer in export markings.
In stock
17.96 €
ValomVAL721141:72

1:72 RF-101G/H Voodoo

The RF-101G/H Voodoo in 1:72 scale is an injection-molded plastic kit of the American reconnaissance version of the supersonic aircraft from the manufacturer Valom.
In stock
28.80 €
Aero PlastAP900151:72

1:72 YF-117A FSD

A plastic kit of the Lockheed YF-117A FSD in 1:72 scale from the Polish manufacturer Aero Plast. A model of the development prototype of the stealth aircraft for assembly and painting.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.