Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:72 MIRAGE F.1 LADDER

A boarding ladder for the Mirage F.1 in 1:72 scale is a resin accessory from LP Models. It is not an airplane model but ground equipment to go with one.

Scale1:72
Manufacturer LP Models
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Mirage F.1 boarding ladder, 1:72 scale — LP Models

A resin accessory in 1:72 scale. It is not an airplane kit but the ladder that is run up for the pilot to board the cockpit. In a small scale an accessory like this has an unexpectedly large effect: a model that otherwise sits alone in a display case looks, thanks to it, like a machine between flights that is being worked on.

Working with resin in a small scale

Wash the parts first in lukewarm water with dish soap, so that the remains of mold release agent disappear — paint will not hold on a greasy surface. Cut the casting blocks off with a thin saw or a cutting disc; never break them off, as in 1:72 scale the rungs are so delicate that a pull in the wrong direction will snap the whole part. Then level the cut with a file or sanding paper, ideally wet and with respiratory protection. The joints are made with cyanoacrylate glue; cement for plastic will not join resin. Small parts are well held in tweezers with a soft grip or on a stick with a drop of adhesive putty.

Painting and fitting

A primer coat is essential with resin — it evens the surface out and brings out any bubbles, which are better dealt with before the final coat. Then supplement the base shade with a thin wash in the seams, a light dry brush on the edges and a dust shade on the lower part. Before fixing it, stand the ladder by the model dry and try where it naturally rests against the edge of the cockpit and stands square to the base. The contents of the package, the number of parts and the target kit are not stated here, so check before you buy that the accessory matches the model you are building.

Who the accessory is for

  • Modelers building the Mirage F.1 in 1:72 scale
  • Small display case scenes where the machine is to look as if it is being serviced
  • Modelers with experience of small resin parts
  • Dioramas of airfield operations without having to build the whole surface

This is an accessory, not an airplane model. It is supplied unassembled and unpainted, without glue and paints, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is purely a resin boarding ladder, that is, an accessory for a model you have already built.

With a thin saw or a cutting disc at a distance from the part, never by breaking it off. Level the remainder with a file.

They are separate products for different scales. Choose the one that matches your model.

Yes, with resin it pays off. It evens the surface out, improves the adhesion of the paint and reveals small flaws in the casting.

Last seen

LP ModelsLP-720681:72

1:72 MIRAGE F.1 LADDER

A boarding ladder for the Mirage F.1 in 1:72 scale is a resin accessory from LP Models. It is not an airplane model but ground equipment to go with one.
In stock
7.56 €
EvergreenEVG4505

Čtercové dlaždice (1,0 x 0,77)

A sheet of white polystyrene measuring 15 x 30 cm with an engraved paving pattern. The groove is 0.77 mm wide and the material is one millimeter thick.
In stock
4.80 €
Syhart DecalSY48-9111:48

1:48 French Naval Aviation Badges

A sheet 1:48 with the emblems of the units of French naval aviation for models of carrier-borne as well as land-based machines.
In stock
9.16 €
AiresAIR46861:48

1:48 Bf 109G-5 (early) cockpit set

Aires Bf 109G-5 (early) cockpit set 1:48 - a resin cockpit set for the early form of the Messerschmitt Bf 109G-5 fighter in 1:48 scale.
In stock
12.80 €
RP ToolzRP025

0,25 mm Styrene sheet (245 X 195 mm)

RP Toolz 0.25 mm Styrene sheet (245 x 195 mm) is the thinnest polystyrene sheet in the range — a modeling material for scratchbuilding and repairs, not a kit. It can be cut with scissors, bends easily and is glued with ordinary modeling plastic cement.
In stock
1.80 €
AberABR35L1641:35

1:35 Barrels for German WWI A7V Tank

Turned barrels for the German A7V tank in 1:35 scale from Aber: a metal replacement for the armament of the first German tank. It is not a kit.
In stock
17.56 €
SX-ArtSXA480681:48

1:48 Mikoyan MiG-15

1:48 Mikoyan MiG-15 is a masking set for building this early jet fighter in 1:48 scale. An accessory for a kit, for sharp framing of the domed cockpit canopy.
In stock
4.76 €
CMKF351991:35

1:35 Iraq Warrior + MP Soldier 2 fig.

1:35 An Iraqi fighter and a military police soldier (2 figures) is a CMK resin set that stands two differently dressed figures side by side.
In stock
9.16 €
QuickwheelQW-480211:48

1:48 Russian Medium tank T-34-85 - Tamiya

The masking set for the road wheels of the T-34-85 tank in 1:48 scale deals with the tire bands of the large discs of Christie suspension. The set is cut for the Tamiya kits.
In stock
6.60 €
PeewitPWM721581:72

1:72 Republic RF-84F Thunderflash (designed to be used with Sword kits)

Peewit 1:72 Republic RF-84F Thunderflash is a self-adhesive masking set for the canopy glazing of the reconnaissance jet. An accessory for a plastic model, not a kit.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.