1:72 UH-60J(SP) Rescue Hawk 'Sea Camouflage'

1:72 UH-60J(SP) Rescue Hawk Sea Camouflage is an injection-molded plastic kit of the Japanese search and rescue helicopter from Hasegawa, in a boxing with markings for a machine in naval camouflage.

Scale1:72
Manufacturer Hasegawa
Product EAN8591111000000

Responsibility details are not available.

36.76 € 27.56 €
22.78 € without VAT
−25 % You save 9.20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

UH-60J(SP) Rescue Hawk Sea Camouflage in 1:72 scale from Hasegawa

The kit from the Japanese manufacturer Hasegawa captures the UH-60J rescue helicopter in the version with added equipment, designated by the suffix SP, in a box devoted to a machine in a naval camouflage finish. It is a classic injection-molded plastic model meant to be glued and painted. The number of parts, the extent of the decal sheet and the marking options are given on the packaging.

The real subject

The UH-60J is the Japanese search and rescue version of the proven Sikorsky UH-60 helicopter, built for the Japan Air Self-Defense Force under license in Japan itself. Compared with the transport Black Hawk it has markedly added equipment for long flights over the sea: a weather radar in the nose, a rescue hoist by the right-hand door, extended equipment for navigation and search and the ability to carry large auxiliary tanks. The machines serve for lifting crews and people from the water surface and from hard-to-reach terrain and are stationed at bases across the Japanese islands. Their finishes changed during service from striking rescue colors to subdued schemes for work over the sea.

Building and painting tips

The helicopter has a large glazed cabin, so it pays to start with the interior and only then close the fuselage up. Mask the glazing before spraying, ideally with strips of masking tape or with ready-made masks. Glue with a thin cement for plastic that wicks into the joint; the thin parts of the hoist and the antennas can be reinforced with cyanoacrylate glue. Apply a primer before painting, as it reveals the remains of parting lines. Spray the camouflage transitions with an airbrush at low pressure, lay the decals on a glossy surface and seal the whole with a matte or semi-gloss varnish according to how weathered a machine you want.

Who the model is for

  • Modelers who collect helicopters in a consistent 1:72 scale.
  • Those interested in Japanese aircraft and rescue services.
  • Builders with basic experience of masking glazing.
  • Those looking for a less usual color scheme than the classic rescue colors.

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a classic kit in injection-molded plastic. The parts have to be cut off the sprues, glued and painted; the model is not supplied assembled or painted.

It refers to the form of the UH-60J rescue helicopter with added equipment for long flights and work over the sea. The list of equipment the kit contains is given in the instructions in the box.

The number of schemes on the decal sheet is given on the packaging. The box is devoted to a machine in a naval camouflage finish.

Yes, cement for plastic, paints and basic tools are not included in the package. Masking tape or masks for the cockpit glazing are useful too.

Last seen

1:72 UH-60J(SP) Rescue Hawk 'Sea Camouflage'-25 %Stock ClearanceFavorite
HasegawaHA023751:72

1:72 UH-60J(SP) Rescue Hawk 'Sea Camouflage'

1:72 UH-60J(SP) Rescue Hawk Sea Camouflage is an injection-molded plastic kit of the Japanese search and rescue helicopter from Hasegawa, in a boxing with markings for a machine in naval camouflage.
Last one!of 4
36.76 €27.56 € You save 9.20 €
HasegawaHASP6651:24

1:24 Volkswagen Beetle Type 1 (1966) - Rio Asaka with Figure

Volkswagen Beetle Type 1 (1966) Rio Asaka with a figure, 1:24 is a plastic kit of the classic Beetle with a figure of a girl from Hasegawa.
In stock
51.16 €
MAiMMAIM16H01421:16

1:16 German Wehrmacht Head w/Schiffchen - Screaming Impression #0142

A German soldier head with a side cap (Schiffchen) is a resin replacement head in 1:16 scale from the manufacturer MAiM - a historical modeling part with an open mouth (a screaming expression).
In stock
2.36 €
BrengunBRL721801:72

1:72 Me P1103 rocket fighter Vacu canopy (Brengun kit)

A 1:72 vacuum-formed cockpit canopy for the Me P1103 model is a replacement clear part for a kit you have already bought, not a model. Thin drawn film is cleaner and more transparent than an injected plastic part.
In stock
5.20 €
Mettalic DetailsMDR48271:48

1:48 F-15. Jet nozzles (opened) (GWH, Revell)

F-15 open engine nozzles 1:48 is a resin and photo-etched set for building finely rendered exhaust nozzles of the F-15 fighter in the open position. Intended for the GWH or Revell kits.
In stock
20.36 €
1:48 Boeing B-17F Flying Fortress radio compartment SPACE-25 %Stock ClearanceFavorite
EduardED3DL481881:48

1:48 Boeing B-17F Flying Fortress radio compartment SPACE

1:48 Boeing B-17F Flying Fortress radio compartment SPACE from Eduard improves the radio operator's compartment of the bomber. An accessory for a model, not a kit.
2 left
13.80 €10.36 € You save 3.44 €
OmaskOMK570191:72

1:72 C-29A/U-125/BAe-125-800 mask (for Sword 72141)

Omask 1:72 C-29A / U-125 / BAe-125-800 is a set of die-cut masking templates for the glazing of a model of the BAe 125-800 jet and its military versions in 1:72 scale.
In stock
4.76 €
LACILAC7200161:72

1:72 Bombardier CRJ 700/900 'Landing Flaps' (For BPK Kit)

The flaps of the CRJ 700 and CRJ 900 regional jets in 1:72 scale : an add-on set that exchanges the retracted trailing edge of the wing for the extended landing position.
In stock
25.56 €
PANZER ARTRE35-1551:35

1:35 Road Wheels for Pz.Kpfw. IV ( H-J ) - Dragon

PANZER ART 1:35 road wheels for the Pz.Kpfw. IV (Ausf. H to J) is a resin set of replacement tank road wheels. It is a detail-up accessory shaped for particular Pz.Kpfw. IV kits, not a model.
In stock
10.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.