1:35 US tanker with binoculars

US tanker with binoculars is a resin figure of an American tanker with binoculars in 1:35 from the maker PANZER ART, meant for fitting out a finished model or for a diorama.

Scale1:35
Manufacturer PANZER ART
Product EAN9991111315112

Responsibility details are not available.

13.96 €
11.54 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

US tanker with binoculars 1:35 — a PANZER ART resin figure

A separate figure of an American tanker with binoculars, cast in resin in 1:35, from the figure line of the maker PANZER ART. It is not a vehicle kit but an add-on to a finished model: the figure is built into a hatch, onto a cargo bed or beside a vehicle in a vignette. It is supplied unassembled and unpainted.

The workmanship of the casting

The casting is divided into the torso with the clothing, the head, the arms and the small items of equipment. The binoculars at the hand are the most delicate place from the mold's point of view, so handle them carefully right from the removal of the casting block. The mold seam lines run along the sides of the figure and along the inner side of the limbs. The cut of the jacket, the pockets, the belt and the buckles are brought out as raised relief that takes a wash well.

Building and painting tips

Wash the casting in lukewarm water with dish soap and rid it of the mold release agent. Cut the casting blocks off with a saw away from the detail, sand the faces down and protect your airways while sanding resin. Glue with super glue (cyanoacrylate) and apply a thin primer once it has dried. A figure with binoculars has its hands at its face, so try the seating of the arms dry and only then glue them for good — otherwise the optics may not meet the eyes. Build the skin from a middle tone toward a darker glaze in the folds and lighter strokes on the nose and the cheekbones. Paint the clothing from the base shade, bring the recesses out with a dark wash and lighten the edges. Make the leather straps and the case of the binoculars darker than the uniform and leave them a slight satin; the lenses can be suggested with a drop of gloss clear coat. Finally bring the surface together with a matte clear coat.

Who the figure is for

  • Modelers who are finishing an American armored vehicle in 1:35.
  • Builders of dioramas, where a figure with binoculars naturally leads the viewer's eye.
  • More experienced modelers used to working with resin.
  • Painters of figures who want to practice a face and fine accessories.

The figure is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The name states one figure. Check the number of parts of the casting and the extent of the equipment included on the box of the figure.

Seat them dry first and check the angle of the head. Only then glue with super glue, ideally in small steps and with the figure supported.

Super glue based on cyanoacrylate. Cement for polystyrene does not dissolve resin and the joint will not hold.

Yes. Remains of mold release agent stay on the casting, and neither the primer nor the paint holds properly on them.

Last seen

PANZER ARTFI35-1141:35

1:35 US tanker with binoculars

US tanker with binoculars is a resin figure of an American tanker with binoculars in 1:35 from the maker PANZER ART, meant for fitting out a finished model or for a diorama.
In stock
13.96 €
LACILAC4800011:48

1:48 KIRBY KITE PROTOTYPE

The Kirby Kite in prototype form is a kit of the British single-seat glider in 1:48 scale from LACI.
In stock
39.96 €
AFV ClubSE735S021:350

1:350 ROC LCT Mk.6 & Landing Vehicle Set

The AFV Club ROC LCT Mk.6 and landing vehicle set in 1:350 scale brings together a tank landing craft and the equipment it put ashore. It is a kit and is supplied unassembled and unpainted.
In stock
39.96 €
ELEFANTEL351261:35

1:35 STEEL WHEELS FOR M60A1-A3 AND MAGACH 6, TYPE 2, COMPLETE SET WITH 14 WHEELS

Steel road wheels for the M60A1-A3 and Magach 6, type 2 is a resin add-on set in 1:35 scale. The name gives a complete set of fourteen wheels for one vehicle.
In stock
27.16 €
KelikRSK35-00311:35

1:35 UH-60L interior 3D decals for Academy kit

A set of 3D decals for the cabin of the transport helicopter UH-60L from the Academy kit in 1:35 scale.
In stock
43.56 €
Art ScaleASKM321061:32

1:32 F-86K Sabre Dog double-sided express fit mask for Kitty Hawk

The Art Scale 1:32 double-sided masking set for the F-86K Sabre Dog from the Kitty Hawk kit brings parts for covering the glazing from both sides.
In stock
10.36 €
Jakab PublishingJKB506AE

6. Fotokronika letounů firmyl Heinkel 1.díl, V.Koos

The picture book Fotokronika letounu firmy Heinkel (A Photo Chronicle of Heinkel Aircraft), part one, by V. Koos. A book from the Jakab Publishing list.
In stock
7.56 €
PlusmodelPMODP30661:35

1:35 US Fire Extinguishers

Plusmodel 1:35 US fire extinguishers is a resin set of miniature American fire extinguishers for detailing vehicles and dioramas.
In stock
10.76 €
Star DecalsSD72-A10151:72

1:72 RMASG Centaurs. Royal Marines Support tanks in Normandy.

The sheet 1:72 RMASG Centaurs brings the markings of the Royal Marines support tanks in Normandy.
In stock
9.56 €
KelikKS720821:72

1:72 IJN Zuikaku 1943 Deck - Base - Acrylic 3 mm (240 x 240 mm) (190g)

An earlier state of the same ship is captured by 1:72 IJN Zuikaku 1943 Deck , a base with deck artwork dated to 1943.
In stock
21.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.