1:72 F-4C/D/J Phantom II BASIC kabuki masks

Kabuki masks 1:72 for the F-4C, F-4D and F-4J Phantom II at the BASIC level are pre-cut self-adhesive masks in the basic extent of the set. It is an accessory for painting a model, not a kit.

Scale1:72
Manufacturer New Ware
Product EAN8591111248648

Responsibility details are not available.

4.76 €
3.93 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Kabuki masks 1:72 for the F-4C, F-4D and F-4J Phantom II, the BASIC level

A set of pre-cut self-adhesive masks of kabuki tape for a model of the Phantom in 1:72 scale. Kabuki tape is a thin paper carrier that adapts well to curves, holds reliably on an edge and after removal leaves no sticky film or matte marks on clear parts. The BASIC designation is a level of extent within this manufacturer's range: it is the smallest variant of the set, above which the more extensive ADVANCED and EXPERT levels still stand. It is not a kit or a finished model, but an accessory used during painting.

The real subject

The McDonnell Douglas F-4 Phantom II was a two-seat twin-engine supersonic fighter aircraft, one of the most widespread combat types of the second half of the twentieth century. The F-4C and F-4D versions were brought into service with the US Air Force, while the F-4J served with the Navy. All of them share the characteristic two-seat cockpit with split canopies, so masking the glazing is among the most demanding parts of painting on this type.

Application and spraying tips

Degrease the clear parts in lukewarm soapy water and let them dry. Lift the mask off the carrier film with tweezers, seat it dry according to the engraved frames and only then press it down with a soft tool. Kabuki tape stands a slight stretch, so it can be drawn even over a rounded transition, but do not pull on it by force, as a deformed mask changes the width of the frame. On a two-seat cockpit mask both canopies at once, so that the frames have a uniform shade. Spray in thin coats and remove the mask shortly after the paint has dried.

Who the set is for

  • Modelers building American jet fighter aircraft in 1:72 scale
  • Those for whom the basic extent of masks is enough
  • Airbrush painting of two-seat cockpits with split canopies
  • Modelers who want a mask without sticky residue on the glazing

The set of masks is an accessory for painting a model. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a designation of the extent of the set within the manufacturer's range. BASIC is the smallest variant, and above it stand the ADVANCED and EXPERT levels with a greater extent.

It is not. It is only a set of masks, and the model and the paints are bought separately.

A thin paper masking tape that adapts well to curves, seals on an edge and leaves no adhesive behind after removal.

According to the name it is intended for the F-4C, F-4D and F-4J alike. Check the exact division of the parts in the package on the packaging of the set.

Last seen

New WareNWAM10111:72

1:72 F-4C/D/J Phantom II BASIC kabuki masks

Kabuki masks 1:72 for the F-4C, F-4D and F-4J Phantom II at the BASIC level are pre-cut self-adhesive masks in the basic extent of the set. It is an accessory for painting a model, not a kit.
In stock
4.76 €
PANZER ARTRE35-6961:335

1:335 US wood ammo boxes for 3inch ammo

A set of American wooden ammunition boxes for 3 inch ammunition, an accessory to models and dioramas in 1:35 scale.
In stock
9.16 €
Number FiveN5-C025

935 White

A white modeling shade from the Number 5 line, named after the car designated 935. Intended for the bodies of car models.
In stock
5.96 €
RESArmRA48-060121:48

1:48 MiG-29 SMT - Subfuselage aerodynamic fuel tank 2000 liters

1:48 MiG-29 SMT - 2000 liter under-fuselage aerodynamic fuel tank is a resin, 3D-printed drop tank for models of the MiG-29 SMT fighter.
In stock
7.56 €
DUAL EXO 3A – POWER YELLOW 60ML.-25 %Stock ClearanceFavorite
AK interactiveAK1505

DUAL EXO 3A – POWER YELLOW 60ML.

Dual Exo 3A Power Yellow is an AK interactive acrylic modeling paint, 60 ml, with a satin semi-gloss finish.
3 leftof 4
4.76 €3.56 € You save 1.20 €
OmaskOMK7481041:48

1:48 L-39 Albatros wheel bay plugs (for Trumpeter)

Omask 1:48 L-39 Albatros — landing gear bay plugs (for Trumpeter) are shaped foam plugs that seal the landing gear bays perfectly during spraying. It is not a kit but a masking aid for a model.
In stock
4 €
CARLOS TOBES – 3GEN SIGNATURE SET – 14 COLORS & 1 FIGURE-25 %Stock ClearanceFavorite
AK interactiveAK11779

CARLOS TOBES – 3GEN SIGNATURE SET – 14 COLORS & 1 FIGURE

The CARLOS TOBES signature set from the 3GEN acrylic range of AK interactive contains, according to its name, fourteen shades chosen by the painter himself and one figure.
Last one!of 4
45.16 €33.88 € You save 11.28 €
MASTERAM321281:32

1:32 F/A-18E/F Super Hornet & EA-18G Growler Angle of Attack Probes - Early Type

1:32 angle of attack sensors for the Super Hornet and the Growler, early type is a turned metal accessory that replaces the plastic sensors on the nose of a model.
In stock
5.56 €
BANON DESIGNBAN503-17

BAN503 hex bolt bulletproof 1,7mm

An imitation bolted joint with a hex head 1.7 mm in size. A dimension that is still held well in tweezers and is at the same time distinct on a model.
In stock
10.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.