1:10 FLYING TIGERS 1942

Young Miniatures 1:10 Flying Tigers 1942 is a resin portrait bust in 1:10 scale. In painting terms it is above all the leather of the flying suit, the cloth lining and a portrait under a flying helmet.

Scale1:10
Manufacturer Young Miniatures
Product EAN8591111755733

Responsibility details are not available.

51.16 €
42.28 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Young Miniatures 1:10 Flying Tigers 1942

A resin portrait bust in 1:10 scale from Young Miniatures. It is supplied unpainted; the building consists of cleaning up and gluing a few parts, and all the expressive work then lies in the painting. An aviation subject is popular because it combines three different materials on a small area: skin, leather and cloth.

The sculpting and the painting task

The portrait of an American airman of 1942 puts the emphasis on a face framed by flying headgear. That framing is also the main pitfall: the helmet or cap takes up the outline, so the face has to be strong enough in color not to be lost in the whole. The leather parts call for a different approach from the cloth: leather has a deeper, warmer base, an irregular sheen and visible wear on the edges, whereas a cloth collar or scarf stays matte and even. If the casting carries goggles, they are the most rewarding element of the bust: the glass is painted as a contrasting transition from a dark edge to a light reflection and draws the eye at once.

Preparation and painting tips

Wash the casting in lukewarm soapy water and let it dry. Cut the casting blocks off with a saw, fill the seams at the joints and sand them with fine paper while protecting your airways. Glue the parts with super glue. Apply a thin primer in several misting passes so that the fine engraving is not clogged. Build the face from the mid tonal value of the skin upward to the highlights and down into the shadows, always with strongly thinned paint. Do the eyes right at the start and tone the white of the eye down to a grayish shade. Underlay the leather of the suit with a dark base, lighten the top layer on the stretched surfaces and suggest wear on the edges with a lighter shade of the same color, never with gray, which looks dusty. Unify the cloth with a filter and highlight the edges lightly. Darken the metal buckles and clasps with weathering. Pin the bust to a base only once the painting is complete, so that the surface of the base does not get in your way while you work.

Who the bust is for

  • Collectors of aviation subjects in a large scale
  • Modelers who want to practice painting leather and cloth side by side
  • Portrait painters looking for a compositionally tight subject
  • Anyone wanting to add to a display of aircraft models

The bust is supplied unassembled and unpainted. Paints, glue and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Use a darker base, lighten the top layer only on the stretched surfaces and suggest the wear on the edges with a lighter shade of the same color. Leather has an irregular rather than an even sheen.

It is recommended to unify the surface with a matte varnish and to bring any sheen back only in spots on the eyes, the metal parts and the leather. Without that the sheen runs together between the materials.

Busts of this type commonly come with their own plinth. Check the design of the base on the box.

Last seen

Young MiniaturesYMYM18431:10

1:10 FLYING TIGERS 1942

Young Miniatures 1:10 Flying Tigers 1942 is a resin portrait bust in 1:10 scale. In painting terms it is above all the leather of the flying suit, the cloth lining and a portrait under a flying helmet.
In stock
51.16 €
Young MiniaturesYMYH18141:10

1:10 Royal Navy Captain 1806

Young Miniatures 1:10 Royal Navy Captain 1806 is a resin portrait bust of a naval officer in 1:10 scale. It is supplied unpainted and the main work is painting the uniform and the face.
In stock
47.96 €
LifecolorLIFUA252

UA252 - Panzergrau Flashed Shade

The brightened position of the German gray Panzergrau Flashed Shade from the Lifecolor acrylic line works on the edges. On a gray vehicle it is the simplest way to get the look of polished sheet metal onto the grab handles, the steps and the rims of the hatches.
In stock
2.76 €
GunzeS097

Mr. Color - light gray - spray

Mr. Color light gray, 40 ml spray, Gunze. A gloss shade from the lacquer (nitro) range Mr. Color in an aerosol can, for fast coverage of large areas without an airbrush.
In stock
7.96 €
BANON DESIGNBAN010-11

BAN010 light hex bolt 1,1mm

1.1 millimeters, a lowered hexagon for the suspension, the swingarm and the mounts of shock absorbers.
In stock
10.36 €
Royal ModelRM7451:35

1:35 Concrete bricks No.1

A set of concrete blocks for dioramas in 1:35 scale. A structural element for a wall, for the cover of a firing position and for a scattered heap of material.
In stock
10.36 €
Yamamoto Model PartsYMPTUN971:24

1:24 Air Valves Type D

The Yamamoto 1:24 air valves set, type D is a 3D-printed resin accessory for a convincing rendering of the small valves on car models.
In stock
3.56 €
Alternity MiniaturesMR-AM071:10

1:10 The Priest

1:10 The Priest is a resin bust from Alternity Miniatures in 1:10 scale. It is supplied as a casting to be assembled and painted.
In stock
25.96 €
MengSPS-005

Nuts and Bolts SET A (small)

Meng Nuts and Bolts Set A (small) is a set of replacement modeling nuts and bolts in a finer rendering for small details.
In stock
4.76 €
T-ModelTK-350061:35

1:35 Wooden Deck for SSyms Early Feature

A wooden load area for the model of the German SSyms heavy railway flatcar in the early version, 1:35 scale.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.