Mr. Color - light gray - spray

Mr. Color light gray, 40 ml spray, Gunze. A gloss shade from the lacquer (nitro) range Mr. Color in an aerosol can, for fast coverage of large areas without an airbrush.

Manufacturer Gunze
Product EAN8591111482721

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Mr. Color light gray, 40 ml spray (Gunze)

The aerosol version of the modeling paint from the Mr. Color range by the Japanese manufacturer Gunze. Watch the chemistry: Mr. Color is NOT an acrylic, it is a solvent-based lacquer (nitro) paint. A lacquer paint forms an exceptionally hard, thin and durable film that holds on plastic extremely well, dries quickly and takes masking. The light gray shade is listed by the manufacturer as a gloss basic (primary) shade; it is tied neither to a particular vehicle nor to a particular army, it is a universal light gray. A gloss surface is also an ideal base under decals.

Use and safety, read before you press the valve

  • Shake thoroughly before use, because the pigment settles to the bottom and unmixed paint sprays unevenly.
  • Spray in thin coats from a distance and in several passes. Trying to saturate the surface at once leads to runs and to orange peel.
  • A lacquer paint is aggressive to plastic. A heavy wet coat applied from close up can attack thin and delicate parts.
  • Never spray over uncured acrylic or enamel, because the solvent dissolves them and the base wrinkles. Only a perfectly dry and compatible base belongs under lacquer, ideally a lacquer primer.
  • Strong fumes. Spray outdoors or in a well ventilated area and use a respirator, because a cloth mask will not protect you from the solvent.
  • Flammable. Do not spray near an open flame and do not store the can in the sun or near a heater.

Spray can or airbrush?

A spray can is fast and convenient, because there is nothing to thin and nothing to clean. It has its limits, though: neither the pressure nor the thinning can be controlled, so you will not manage fine transitions, misting, preshading or modulation with it. For that you need an airbrush and paint in a bottle. The ideal combination is a spray can for the base coat on large areas and an airbrush for the effects.

Who the paint is for

For modelers who want a fast, hard and reliable base coat without setting up an airbrush, and for anybody who needs a universal light gray shade with a gloss surface.

A solvent-based lacquer (nitro) paint. Flammable. Spray outdoors or in a well ventilated area, use a respirator and protect your eyes. Keep out of the reach of children.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. Mr. Color is a solvent-based lacquer (nitro) paint, even though a number of shops list it under acrylics. It is not thinned with water and it is not compatible with uncured acrylic or enamel underneath. It is precisely the solvent chemistry that gives it a hard, thin and very durable film.

That is risky. The solvent in the lacquer can dissolve and wrinkle an uncured acrylic or enamel coat. If there is no other way, the base has to be perfectly dry and the lacquer is applied in very thin misted coats. It is safe to spray lacquer on bare plastic or on a lacquer primer.

First shake the can thoroughly, then spray from a distance, with a steady movement and in several thin coats with a pause for drying. Trying to saturate the surface in one pass ends in runs and a rough, grainy finish.

For a base covering coat on large areas, yes. For fine transitions, misting, preshading and modulation, no, because neither the pressure nor the thinning can be regulated on a spray can. For that you need an airbrush and paint in a bottle.

Last seen

GunzeS097

Mr. Color - light gray - spray

Mr. Color light gray, 40 ml spray, Gunze. A gloss shade from the lacquer (nitro) range Mr. Color in an aerosol can, for fast coverage of large areas without an airbrush.
In stock
7.96 €
TrumpeterTR022881:32

1:32 Messerschmitt Bf 109E-3

An injection-molded plastic kit of the Messerschmitt Bf 109E-3 in 1:32 scale from Trumpeter - a large, detailed model of the early Emil from the start of the war.
In stock
27.96 €
CMKQ483821:48

1:48 DH.82 Blind Flying Hood

The DH.82 blind flying hood 1:48 is a resin accessory from the CMK brand for a model of the de Havilland DH.82 trainer biplane. It is not a kit of the aircraft but a detail part.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.