BAN010 light hex bolt 1,1mm

1.1 millimeters, a lowered hexagon for the suspension, the swingarm and the mounts of shock absorbers.

Manufacturer BANON DESIGN
Product EAN9791111870955

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The swingarm, the shock absorbers, the footpeg brackets

The rear part of the chassis is held together by several large joints that carry the whole weight of the machine as well as the forces from bumps. The swingarm pivot is secured with a nut and a washer, the shock absorbers are screwed at the top to the frame and at the bottom to the arm, the footpeg brackets are attached to a pair of eyes on the tube. The heads here are distinctly larger than on covers and tend to come with washers, because they have to spread the pressure on a thin-walled tube.

1.1 millimeters matches exactly this layer. It is the second to last of the individual diameters offered and on a model it already makes a prominent element: a prism of this size casts a shadow of its own and decides how massive the suspension will look. Anyone who underrates the heads gets a chassis that looks lighter than it should.

The choice between neighboring steps

The difference from the coarsest size offered is only a tenth of a millimeter, but on load-bearing assemblies it tells. It pays to decide according to how large the eye or the flange under the head is: the head should cover the eye to roughly half its width, neither be lost in it nor overhang it. The remaining area is then left for a washer, if you want to suggest one.

  • The second to last of the individual diameters offered
  • Intended for swingarm pivots, shock absorbers and footpeg brackets
  • A large head gives the suspension a properly massive look
  • Choose according to the width of the eye or flange under the head
  • It leaves room for a suggested washer beneath it
  • A prism of this size casts a shadow of its own on the surface

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The swingarm pivot, the upper and lower mounting of the shock absorbers and the eyes of the footpeg brackets on the frame tube.

By the width of the eye or the flange under the head. The head should cover it to roughly half.

So that the pressure is spread on a thin-walled tube and the head does not dig into it.

Last seen

BANON DESIGNBAN010-11

BAN010 light hex bolt 1,1mm

1.1 millimeters, a lowered hexagon for the suspension, the swingarm and the mounts of shock absorbers.
In stock
10.36 €
Royal ModelRM7451:35

1:35 Concrete bricks No.1

A set of concrete blocks for dioramas in 1:35 scale. A structural element for a wall, for the cover of a firing position and for a scattered heap of material.
In stock
10.36 €
Yamamoto Model PartsYMPTUN971:24

1:24 Air Valves Type D

The Yamamoto 1:24 air valves set, type D is a 3D-printed resin accessory for a convincing rendering of the small valves on car models.
In stock
3.56 €
Alternity MiniaturesMR-AM071:10

1:10 The Priest

1:10 The Priest is a resin bust from Alternity Miniatures in 1:10 scale. It is supplied as a casting to be assembled and painted.
In stock
25.96 €
MengSPS-005

Nuts and Bolts SET A (small)

Meng Nuts and Bolts Set A (small) is a set of replacement modeling nuts and bolts in a finer rendering for small details.
In stock
4.76 €
T-ModelTK-350061:35

1:35 Wooden Deck for SSyms Early Feature

A wooden load area for the model of the German SSyms heavy railway flatcar in the early version, 1:35 scale.
In stock
9.56 €
Top StudioTD232621:20

1:20 - 24 Oxygen Sensor

Top Studio Oxygen Sensor is a detail part for 1:20 and 1:24 scale: a miniature lambda sensor for fitting into the exhaust system of a racing car model.
In stock
5.96 €
T-ModelTK-350021:35

1:35 Wooden Tips for SSys / SSkra

Wooden decking for the SSys and SSkra cars in 1:35 from T-Model. The railway car and the equipment carried are not included.
In stock
9.56 €
GAS HANSGH-NB03008

Hexagonal Nut 1.0 mm

The GAS HANS hexagonal nut 1.0 mm is a set of miniature imitations of hexagonal nuts for superdetailing models and dioramas.
In stock
3.96 €
SX-ArtSXA360631:35

1:35 35 Holographic film FV510 Warrior (MENG)

Holographic film for imitating the vision blocks and periscopes of the FV510 Warrior combat vehicle in 1:35 scale, for the kit from the manufacturer Meng.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.