Resin wheels with weighted tires for the CH-47 Chinook helicopter in 1:144 scale from the maker Armory will make the landing gear of a small model more accurate.
Responsibility details are not available.
This item is not a kit of a helicopter, but an accessory: a set of wheels cast in modeling resin in 1:144 scale. The tires have the sagging of the contact surface cast in, so that once finished the model does not stand on perfectly round cylinders but looks as though its weight were bearing down on the landing gear. On a machine with such a low and clearly visible landing gear this detail tells even in a small scale. The maker is Armory.
The Boeing CH-47 Chinook is an American heavy transport helicopter with a tandem arrangement of two main rotors, that is without a tail rotor at the tail. It is used to carry people, cargo and materiel, among other things as a slung load under the fuselage. Characteristic are the angular fuselage with a cargo ramp and the four-wheel landing gear arranged at the sides of the fuselage.
Wash the castings with lukewarm soapy water, so that they get rid of the mold release agent. Cut the casting blocks off with a saw in the plane of the flattening, so that the sagging stays preserved, and sand the surface over only lightly, wet and with respiratory protection. It is glued with cyanoacrylate glue (super glue). Do not paint the tires in pure black; a very dark gray tone is better. Set the wheel rim apart and at the end add a light dust pigment, because the landing gear of a transport helicopter tends to be grimy.
This is a resin accessory, not a model of a helicopter. Glue, paints and the kit are not included in the package. Check the match with your own kit before buying.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!