Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!
A resin set of Pratt and Whitney JT8D-7B engine nacelles for the Boeing 727 in 1:144 scale from the manufacturer LACI. A detail accessory for building the three-engine airliner, not the model itself.
Responsibility details are not available.
A resin accessory intended for building the Boeing 727 in 1:144 scale. The set replaces the engine installation from a kit with a more accurate casting. The accessory is used on a model under construction and does not make up the aircraft on its own.
The Boeing 727 is among the few airliners with three engines concentrated at the rear. Two nacelles hang on short pylons at the sides of the rear fuselage, the third engine is built into the root of the vertical tail and air is led to it by a curved duct from an intake above the fuselage. The installation is therefore not the same on all three engines: the side nacelles have a classic intake ring and an exhaust nozzle, while the middle engine shows externally only through an intake and an exhaust at the rear. The JT8D-7B is one of the versions of the older turbofan engine with a low bypass ratio, that is of the slim type with a narrow bypass duct, in which most of the thrust arises in the core. For the modeler that means the nacelle is long and fairly thin, so every deviation in alignment with the pylon shows up a great deal.
First wash the mold release agent off the castings. Cut the casting remnants away with a saw and finish with a file; on a long thin part it is better to take material off little by little than to risk bending it. Resin sands more softly than polystyrene and clogs paper quickly, so work wet and protect your airways. Only super glue holds the joints. Try dry how the nacelle seats on the pylon and how it sits in relation to the fuselage; with a rear installation a deviation shows up most when seen from behind. Paint the inside of the intake and the cone before seating it.
The accessory is supplied unassembled and unpainted, as a resin casting for more experienced modelers. Glue, paints and a base kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!