Photo-etched flanges for wooden propellers in 1:144 scale. A metal part replaces the thicker plastic shape and the propeller hub then looks closer to the real thing.
Responsibility details are not available.
Wooden propellers were fixed to the shaft with metal flanges, that is with discs that clamped the blades and transferred the thrust into the hub. In 1:144 scale such a disc comes out extremely thin, and a plastic part from a kit easily becomes too massive against the real thing. Metal photo-etching evens this disproportion out.
The parts are etched from metal sheet. The material holds a sharp outline even once painted and will take fine shaping that on thin plastic would end in a crack. The set aims at small aircraft kits in 1:144 scale, where every needlessly thick shape on a propeller is noticed at once.
Separate the part with a sharp blade a little way from the fret tab and sand the remainder with a fine file. Before gluing, wash and degrease the photo-etching; the joint then holds considerably better. Choose cyanoacrylate glue and apply it in a minute amount, best of all with the tip of a piece of wire. Metal will call for a base coat under the paint, otherwise the paint comes away during handling. Apply the shade itself in thin coats, so that the fine surface is not flooded. Lay the small parts out on a light surface and work over a soft cloth; looking for a disc that has sprung away on the floor takes more time than the whole build.
The set is for modelers who do not mind fine work and who want a propeller closer to reality. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!