1:144 P&W JT8D-7 BOEING 737-100

LACI 1:144 JT8D-7 for the Boeing 737-100 is a resin set of engine nacelles that replaces the plastic parts of a kit. It is an accessory to a model, not a kit of an airplane.

Scale1:144
Manufacturer LACI
Product EAN8991111000044

Responsibility details are not available.

14.76 €
12.20 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

LACI 1:144 JT8D-7 for the Boeing 737-100

A resin accessory set in 1:144 scale from LACI. It replaces the engines of a Boeing 737-100 model with more accurately shaped castings of the Pratt & Whitney JT8D-7 powerplant. It is not a kit of an airplane - these are parts you buy for a model you already have under way.

About the powerplant

The JT8D is a low-bypass turbofan engine that powered the first generation of Boeing 737s and became one of the most widespread civil engines of its day. The JT8D-7 subversion is among those with which the short first series of 737-100s flew. What is characteristic is above all the installation: on this generation the nacelles are attached tight against the lower surface of the wing, so they look quite different from the offset pylons of the later 737s with CFM56 engines. It is precisely this detail that tends to be simplified on kits, and a resin replacement solves it.

Usage tips

  • Wash the castings in lukewarm water with detergent to free them of mold release agent, because otherwise paint will not hold.
  • Cut the casting blocks off with a saw and level the mating surface on abrasive paper laid on glass.
  • Before gluing, try the fit dry and check that both nacelles sit symmetrically against the wing.
  • Glue with cyanoacrylate glue, because ordinary cement for plastic will not join resin.
  • Spray the metallic paint on the metal areas of the exhaust section only onto a smooth and well sanded base.

Who the set is for

  • Builders of classic airliners in 1:144 scale
  • Modelers who are not satisfied with the shape of the engines from the box
  • More experienced builders, because resin means cutting, sanding and filling

This is an accessory to a kit, not a model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a resin replacement for the engines of a Boeing 737-100 kit in 1:144 scale. The model itself, paints and glue are not in the package.

The shape of the nacelle and the way it joins the wing tends to be simplified in plastic in this scale. A resin casting holds the shape more accurately and takes finer detail.

The set is listed for the 737-100 version. Separate engine sets exist for the later forms, because both the installation and the subversion of the engine differ.

Cyanoacrylate glue. Cement for plastic does not dissolve resin, so the joint will not hold.

Last seen

LACILAC1440901:144

1:144 P&W JT8D-7 BOEING 737-100

LACI 1:144 JT8D-7 for the Boeing 737-100 is a resin set of engine nacelles that replaces the plastic parts of a kit. It is an accessory to a model, not a kit of an airplane.
In stock
14.76 €
Inside the ArmourITA3320091:32

1:32 Martin Baker Mk.9 Seat for Hawker Siddley Harrier GR.1 (3D-Printed)

A Martin-Baker Mk.9 ejection seat for the Hawker Siddeley Harrier GR.1 in 1:32 scale. Printed parts with fine division of the frame and the padding.
In stock
20.76 €
Inside the ArmourITA3351001:35

1:35 Alvis FV622 Stalwart - Early Wheels (3D-Printed / for Airfix Kits)

A set of early pattern wheels for the British Alvis FV622 Stalwart amphibious truck in 1:35 scale. Six printed wheels with a sharply rendered off-road tread and fully modeled sidewalls replace the simplified parts from the Airfix kit.
In stock
38.76 €
Quinta StudioQD321871:32

1:32 P-47D Thunderbolt Bubbletop (Late) 3D-Printed & coloured Interior on decal paper (Trumpeter)

The 3D color interior for the P-47D Thunderbolt Bubbletop (1:32) is a set of 3D decals on backing paper for detailing the cockpit of a model of the American fighter. The set is intended for the Trumpeter kit.
In stock
33.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.