1:200 USS Arizona part 5 - railings

The photo-etched accessory set 1:200 USS Arizona part 5 - railings from the manufacturer Eduard adds railings in photo-etched sheet to a model of the battleship USS Arizona in 1:200 scale. It is an accessory for a kit, not a model of the ship.

Scale1:200
Manufacturer Eduard
Product EAN8591111980265

Responsibility details are not available.

23.60 € 17.72 €
14.64 € without VAT
−25 % You save 5.88 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:200 USS Arizona part 5 - railings, photo-etched set

The fifth part of the photo-etched range by the Czech manufacturer Eduard for a model of the American battleship USS Arizona in 1:200 scale. According to the name, the set deals with the railings. The photo-etch is worked into the model afterwards; the kit of the ship itself is not included.

Scale fidelity in railings

Railings are the classic reason modelers reach for photo-etch on ship models. Real railings are made up of thin stanchions and a few horizontal wires. Converted to 1:200 scale the section comes out at tenths of a millimeter, which is below what an injection press can resolve. A model with no railings looks empty, while a model with plastic railings looks heavy. Photo-etched sheet is so far the only available way to come close to the original, and that is why Eduard covers it with a set of its own.

Tips for working with photo-etched parts

Railings are installed as one of the last things, ideally once the deck has been painted and weathered. Measure the lengths against the model and cut a slightly longer run, which you then shorten in place. Make the fold at the corners over the edge of a razor blade or a bending tool, so that the corner stays sharp. It is glued with thin cyanoacrylate applied point by point, never along the whole seam at once. If you are going to paint the railings after they are glued on, bear in mind that the paint must not clog the gaps between the wires, otherwise the effect of fineness is lost; a thin coat from an airbrush is therefore better than a brush.

Who the set is for

  • Builders of a model of USS Arizona in 1:200 scale
  • Modelers who want railings true to scale instead of a plastic substitute
  • Those finishing a large model and looking for the last layer of detail
  • More experienced builders with the basic equipment for photo-etch

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Only once the deck has been painted and weathered, as one of the last operations. Otherwise they are easily caught during the rest of the work.

With a thin coat from an airbrush. A heavy coat from a brush clogs the gaps between the wires and the fineness of the photo-etch is lost.

The manufacturer does not give the length or the number of frets in the name. Check them on the box.

You do not. The individual parts stand alone and can be bought according to which area you want to refine.

Last seen

1:200 USS Arizona part 5 - railings-25 %Stock ClearanceFavorite
EduardED531111:200

1:200 USS Arizona part 5 - railings

The photo-etched accessory set 1:200 USS Arizona part 5 - railings from the manufacturer Eduard adds railings in photo-etched sheet to a model of the battleship USS Arizona in 1:200 scale. It is an accessory for a kit, not a model of the ship.
Last one!
23.60 €17.72 € You save 5.88 €
ReskitRSU72-01081:72

1:72 Eurofighter EF-2000A/EF-2000B Typhoon open exhaust nozzles

Replacement exhaust nozzles in the open position for models of the Eurofighter Typhoon in the EF-2000A and EF-2000B versions in 1:72 scale.
In stock
15.16 €
ReskitRS48-02131:48

1:48 North-American RA-5C Vigilante wheels set

Reskit 1:48 RA-5C Vigilante - resin wheels set is a detail accessory for models of the American reconnaissance aircraft. Weighted wheels replace the plastic landing gear parts.
In stock
10.36 €
MAiMMAIM354481:35

1:35/Uniscale Rocks - Felsen, ultralight (6pcs)

Rocks (Felsen) ultralight, 6 pieces from MAiM : a set of ultralight rock formations in the universal 1:35 scale for building diorama terrain.
In stock
17.16 €
Model MakerMM-D721691:72

1:72 Avro Lancaster in Polish service part II

Avro Lancaster in Polish service part II is a Model Maker decal set in 1:72 scale for models of the Avro Lancaster bomber. The second part of a series aimed at machines in Polish service.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.