The photo-etched accessory set 1:200 USS Arizona part 6 - superstructure from the manufacturer Eduard refines the superstructures of a model of the battleship USS Arizona in 1:200 scale. It is an accessory for a kit already bought, not a model of the ship.
Responsibility details are not available.
The sixth part of the photo-etched range by the Czech manufacturer Eduard for a model of the American battleship USS Arizona in 1:200 scale. According to the name, the set covers the superstructures. Its contents are photo-etched parts in thin sheet, added to a kit already bought.
On a battleship the superstructures are the largest continuous area above the deck and at the same time the place with the most small items per square meter. Injection-molded plastic is at a disadvantage here on principle, because everything meant to be thin or open has to be molded in a thickness the mold can manage. Photo-etched parts close that gap and, above all, give the surfaces back their depth, because they cast a real shadow.
On larger photo-etched surfaces the painting is the key. Degrease the metal with alcohol or detergent before spraying and let it dry thoroughly; a fingerprint will reliably stop the paint keying. Lay down a thin primer — on photo-etch a separate primer works better than spraying the top color directly. Keep the coats thin, because heavy paint fills in the fine structure you bought the photo-etch for. Do the weathering only once the base color has dried, and preferably with washable products, so that you can pull the excess off without endangering the layer underneath.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!