A twenty-inch rim completed with rubber with a drawn-out side. Shoes for cars built as low as possible, four wheels, 1:24.
Responsibility details are not available.
A stretched tire on a wide rim is the recognizable mark of a whole direction in building. The side of the rubber is deliberately drawn out here, so that the edge of the rim stays exposed and the wheel looks somewhat larger than it really is. On a real car that goes hand in hand with tilting the wheels inward and with a lowered chassis; on a model in miniature the same impression has to be produced by the shape of the part, because there is nothing there to stretch.
Against the variant with ordinary rubber, this set has a narrower and flatter profile with a visibly smaller rise above the edge of the disc. The silhouette of the car thereby sits lower and the arch seems to fill up. Anyone building a car in a quieter, series form will reach rather for the other variant of the same rim, because this shape of the side would come across as jarring on it.
The whole makes sense only when the mounting of the axles is adapted to it as well. A wheel seated at the original height of the arch kills the effect, so the height of the seating and sometimes the angle at which the wheel stands in the arch are usually worked. The parting seam around the circumference of the rubber is filled before painting, otherwise it will show in a matte shade. It is likewise worth checking whether the wheel does not bear against the inner edge of the arch at its extreme position.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!