Wheels in the Mugen CF-48 pattern with aerodynamic covers and tires, in the fifteen-inch size and in 1:24 scale.
Responsibility details are not available.
Mugen is a Japanese brand associated with tuning and racing Honda cars, and CF-48 is the designation of one of its wheel patterns. A fifteen-inch diameter matches smaller cars and the time when wheels of that size were commonly used for competition as well.
Wheels in 1:24 scale, tires to go with them and aerodynamic covers in addition. The cover is a flat disc fitted onto the wheel from the outside to hide the spokes; on the real car it calms the air flow around the wheel, and on a model it turns it into a distinctly racing element. The inch figure refers to the real car: fifteen inches is 381 mm, which in 1:24 scale works out to a rim diameter of just under sixteen millimeters.
Assemble the wheel dry and try it in the wheel arch; only then glue it. Parts that are not polystyrene are joined with cyanoacrylate glue (super glue); solvent cement for plastic does not work on them. Cut the excess material away with a sharp blade a little clear of the part and sand the remainder down. Wash and degrease the parts and apply a primer before painting. Paint the covers separately from the rims and fit them only at the end, so that you do not clog the mating surface with paint; the smooth surface of the cover will also take a glossier finish than the wheel itself.
For builders of Japanese and competition cars in 1:24 scale who want to set the model apart from the production version. The kit, paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!