Seventeen-inch OZ MiTo wheels with tires for a low seating, 1:24 scale. The narrower profile of rubber stretched over a wide rim matches the style of modified cars tucked deep into the arches.
Responsibility details are not available.
The designation Stance aims at the style in which the wheel disappears deep under the lip and the tire is literally pulled over the rim. The sidewall thereby looks narrower than the width of the barrel would warrant, and the car gains a stance you will never see on a series form. A seventeen-inch diameter is rewarding for this style, because it lets both the drawing of the spokes and the lean of the whole wheel come out.
Without working the underside the effect will not come about. The axle pins are shortened or their seating is moved a few tenths of a millimeter higher, so that the body drops. Negative camber follows: the wheel is tilted inward at its upper edge. Set the lean the same on both sides, because a difference between the left and the right flank catches the eye sooner than any other detail.
Tucking the wheel inward almost always runs into the inner wall of the fender. Take the material away at that place with a ball burr or a scalpel, but keep checking the thickness of the wall against the light, so that the body is not broken through. The inside of the arch then only needs going over with a dark matte shade, otherwise a light mark left by sanding would give the whole effect away.
The barrel is painted separately from the rubber, ideally before the two parts are joined. After gluing, stand the model on a flat board and look at it straight from the front: both front wheels have to form the same angle and the lower edges have to touch the surface at the same time. Only then is there any point in adding arch liners and the rest of the details.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!