Quickboost MiG-23 Flogger braking parachute 1:32 is a small resin detail set that will add to a model of the MiG-23 fighter the housing of the braking parachute.
Responsibility details are not available.
This is not an airplane kit but an add-on resin set from the Quickboost brand in 1:32 scale. The set represents the part of the braking parachute for a model of the MiG-23, which will sharpen up the rear part of the fuselage. The set is meant for more experienced modelers.
The MiG-23, under the NATO reporting name Flogger, is a Soviet fighter with a variable-geometry wing. On landing it used a braking parachute stowed in the rear part of the fuselage, which shortened the run along the runway.
First wash the resin parts free of mold release residue, cut off the casting blocks carefully and glue them with super glue (cyanoacrylate). Use respiratory protection when sanding. Fit the part to the rear part of the fuselage of the model. The surface is usually painted with an airbrush and the detail picked out with a fine wash.
This is an accessory, not a complete model of an airplane. The base kit, glue, paints and other parts are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
