1:35 Sd.Kfz 7 front wheels with spare (weighted) type 1

1:35 Sd.Kfz 7 front wheels with spare (weighted) type 1

11.16 €
Add to Cart

1:35 Sd.Kfz 7 front wheels with spare (weighted) type 1

With this set the eight-ton German half-track tractor receives front wheels with a trodden patch and a spare in 1:35 scale. The tread pattern is designated as the first type, and the accessory comes from Pimp My Miniatures.

Scale1:35
Manufacturer Pimp My Miniatures
Product EAN87991111783629

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Front wheels and a spare for the Sd.Kfz. 7

This interchangeable set by Pimp My Miniatures offers the front steered wheels for the German half-track tractor Sd.Kfz. 7 and a spare wheel to go with them. The tires are rendered as loaded by the weight of the machine, that is, with a slightly trodden patch and a widened footprint at the point of contact with the road. That is a detail cast wheels from kits usually do not have.

What the tractor was for

The Sd.Kfz. 7 was among the most useful machines in the German army. At the front it had a conventional steered axle, at the rear a wide tracked suspension with interleaved road wheels, which gave it traction even in ground where trucks got stuck. It towed 88 mm anti-aircraft guns and heavy field howitzers, it recovered damaged equipment and it carried crews and ammunition. Self-propelled anti-aircraft variants were also built on its bed. It was made from the middle of the 1930s and served on every front until the end of the war.

Advice on using the set

Turn the front wheels slightly to one side, so that the vehicle does not look stiff. A weighted patch only makes sense when there is no gap beneath it, so set the base and the tracks so that the whole machine rests on the ground. You can dirty the spare a little differently from the wheels in use, for instance leaving it lighter and dusty.

Who the accessory is for

  • for builders of German artillery traction
  • for scenes with a tractor and a gun hitched to it
  • for modelers who want the vehicle resting on the ground rather than floating
  • for advanced builders of armored equipment

Glue, paints and the tractor itself are not supplied with the accessory.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The tire is rendered the way it looks under the weight of a standing machine, with a settled and widened patch.

No, it is the wheels of the front axle and a spare. The set does not deal with the road wheels of the tracked running gear.

The most sensible point is after the hull has been painted and weathered, so that they do not have to be moved during the work.

Last seen

Pimp My MiniaturesAFVs35-0151:35

1:35 Sd.Kfz 7 front wheels with spare (weighted) type 1

With this set the eight-ton German half-track tractor receives front wheels with a trodden patch and a spare in 1:35 scale . The tread pattern is designated as the first type, and the accessory comes from Pimp My Miniatures.
In stock
11.16 €
Pimp My MiniaturesAFVs35-0911:35

1:35 M2/M3/M16 Halftrack front wheels set with spare (weighted) type 2

Replacement front axle wheels with a spare for models of the M2, M3 and M16 halftracks in 1:35. The type 2 variant brings a different tread pattern and tires with a flattened contact patch.
In stock
9.16 €
AiresAIR72821:72

1:72 F/A-18E/F Super Hornet cockpit set

The Aires 1:72 F/A-18E/F Super Hornet cockpit set is a resin aftermarket set for experienced modelers that replaces the cockpit of a kit of this American carrier-based multirole aircraft with a three-dimensional casting complemented by photo-etched parts.
In stock
20.80 €
GAS HANSGH-T720071:72

1:72 T-34 Halved WAFER Tracks

Tracks for the T-34 in the halved variant of the waffle pattern, 1:72 scale, from the brand GAS HANS. These are replacement tracks for a model, not a kit of the tank.
In stock
11.16 €
1:72 SB2C undercarriage-25 %Stock ClearanceFavorite
EduardED725501:72

1:72 SB2C undercarriage

1:72 SB2C undercarriage is a photo-etched set from Eduard for sharpening up the landing gear of a model of the Curtiss SB2C Helldiver carrier-based dive bomber in 1:72 scale.
Last one!
10.40 €7.80 € You save 2.60 €
GAS HANSGH-T720051:72

1:72 Type 2 Ka-Mi Tracks

Tracks for the Japanese amphibious tank Type 2 Ka-Mi in 1:72 scale from the brand GAS HANS. These are replacement tracks for a model, not a kit of the tank.
In stock
11.16 €
1:48 B-17G nose interior-25 %Stock ClearanceFavorite
EduardED493601:48

1:48 B-17G nose interior

Eduard 1:48 B-17G nose interior is a color photo-etched detail set for bringing out the interior of the forward fuselage of the four-engine B-17G Flying Fortress bomber. It is not an airplane model but an accessory for a kit.
Last one!of 5
13.80 €10.36 € You save 3.44 €
New WareNWAM00571:48

1:48 Suchoj Su-25 UB/UBK BASIC masks

A set of self-adhesive Su-25 UB/UBK Basic masks in 1:48 scale from New Ware - kabuki masks for the glazing and the wheels, not a kit.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.