1:350 U.S. Aircraft Carrier CV-10 Yorktown 1944 Wooden Deck (for Trumpeter kit 05603)

1:350 U.S. Aircraft Carrier CV-10 Yorktown 1944 Wooden Deck (for Trumpeter kit 05603)

42.36 €
Add to Cart

1:350 U.S. Aircraft Carrier CV-10 Yorktown 1944 Wooden Deck (for Trumpeter kit 05603)

A wooden deck for a model of the aircraft carrier USS Yorktown CV-10 as of 1944, 1:350 scale - a large self-adhesive veneer with pre-printed plank laying for the flight deck of the Trumpeter 05603 kit.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

42.36 €
35.01 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden flight deck USS Yorktown CV-10 1944 in 1:350 scale

An accessory for a model of the aircraft carrier USS Yorktown CV-10 in the state of 1944, in 1:350 scale. It is not a kit; it is a wooden veneer with printed plank laying and a self-adhesive backing, which is glued onto the plastic flight deck of the model. On aircraft carriers the effect is the strongest of all types of vessel: the flight deck makes up the great majority of the visible area of the model, so swapping engraved plastic for real wood changes the overall impression of the build.

A large area calls for a different technique

The veneer of a flight deck is long and narrow and bends easily during handling. Work in two stages, therefore: first lay the whole part on dry and fix it with masking tape at both ends, check that it runs parallel with the edges and check the position of the cut-outs for the elevators and the superstructure. Only then release one end, take the film off over a short stretch, press it down and work on in strips toward the other end. The tape on the end that is still covered keeps the alignment the whole time.

Working with the curve of the bow

The forward part of the deck on an aircraft carrier narrows and runs into a curve, where the veneer struggles most with the shape. Work in really short sections here and do not pull the veneer sideways, only press it straight down. When the material resists in the curve, breath or a brief warming with a hairdryer on a low setting helps; the veneer softens slightly and adapts. Never overheat it, though, as the adhesive layer would run.

Who the set is for

  • Builders of aircraft carriers in 1:350 scale
  • Modelers bothered by an engraved imitation of planks over a large area
  • Those who can work slowly and in sections
  • Large display builds in which the deck is the dominant feature

This is an accessory for a plastic kit, not a model on its own. The part is prepared for the Trumpeter 05603 kit; please check the match. The model and the paints are not supplied with it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Lay it on dry first and fix both ends with masking tape. Then release and glue it gradually in short strips.

Work in very short sections and press straight down. A brief warming with a hairdryer on a low setting softens the veneer, but you must not overheat it.

No. This is solely a wooden deck. The plastic kit has to be bought separately.

Last seen

Artwox ModelBW100211:350

1:350 U.S. Aircraft Carrier CV-10 Yorktown 1944 Wooden Deck (for Trumpeter kit 05603)

A wooden deck for a model of the aircraft carrier USS Yorktown CV-10 as of 1944, 1:350 scale - a large self-adhesive veneer with pre-printed plank laying for the flight deck of the Trumpeter 05603 kit.
In stock
42.36 €
Artwox ModelBW100191:350

1:350 Italian Navy Battleship RN Littorio 1941 Wooden Deck (for Trumpeter kit 05319)

A wooden deck for a model of the Italian battleship RN Littorio as of 1941, 1:350 scale - a self-adhesive veneer with pre-printed deck plank laying. Cut for the Trumpeter 05319 kit.
In stock
17.16 €
AberABR48L421:48

1:48 76,2 mm PaK 36(r) Barrel for German Tank Destroyer Marder III (for Tamiya Kits)

Aber 1:48 76.2 mm PaK 36(r) barrel for the Marder III is a turned metal gun barrel for the German Marder III tank destroyer with its captured Soviet gun.
In stock
13.16 €
MASTERAM721361:72

1:72 Do 335 A - detail set - MG 151, FuG 25a antenna, Pitot Tube

Do 335 A – detail set (MG 151, FuG 25a aerial, pitot tube) 1:72 is a set of turned metal barrels and accessories from Master. It is not a model but an accessory that sharpens a kit.
In stock
5.96 €
AcademyAC135471:24

1:24 U.S. Army 1/4 Ton 4x4 Utility Truck

The American 1/4 ton 4x4 utility truck 1:24 is a plastic kit of the legendary military vehicle of the Second World War.
In stock
37.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.