Masks for the deck areas of a model of the heavy cruiser USS Des Moines CA-134 in 1:350 scale. Cut shapes for spraying the deck.
Responsibility details are not available.
A set of cut masks for spraying the deck areas of a model of the American heavy cruiser. The shapes match the layout of the deck, so cutting from tape and tracing by eye fall away, and on a large area every deviation shows at once.
The USS Des Moines was the first unit of the class of the same name and belonged to the last big gun cruisers of the US Navy. She carried nine 203 mm guns in three turrets and compared with the older cruisers she had a considerably higher rate of fire thanks to automatic loading. The ship was long, with a pronounced straight deck, and it is exactly the extensive deck areas that give a model in 1:350 scale its character.
First spray the paint that is to stay visible under the mask and let it cure properly. Only then stick the masks on and press the edges down with a toothpick, so that no paint runs under them. Apply the second color in thin coats and from the edge of the mask inward; a thick coat creates a ridge at the edge. Take the masks off soon after drying, at a sharp angle and slowly, not perpendicularly upward. Wipe any adhesive residue off with a cotton swab dampened in spirit, but carefully around fresh paint.
The package contains masks only. The ship model, paints and a wooden deck are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!