1:48 Boeing B-17G Flying Fortress SPACE

Boeing B-17G Flying Fortress SPACE in 1:48 scale is a set of Eduard 3D decals for a detailed rendering of the interior. It is not a kit but an accessory for a model already obtained.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

11.80 € 8.84 €
7.31 € without VAT
−25 % You save 2.96 €
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Boeing B-17G Flying Fortress SPACE 1:48 — Eduard 3D decals

A set from the SPACE range by the Czech manufacturer Eduard in 1:48 scale. It is not a kit of the bomber but a set of colored 3D decals, that is film elements with a raised relief, which are fitted above all to the instrument panel, the side panels and other parts of the cockpit. Compared with a classic flat decal they have a real thickness, so the instruments and controls look three-dimensional even up close and when the model is photographed.

The real subject

The B-17G Flying Fortress is the last and most numerously produced version of the American four-engine heavy bomber of the Second World War period. It is told from the older variants at first glance by the remotely aimed turret under the nose, added for defense against head-on attacks. The machine had four radial engines, extensive glazing of the nose and extensive defensive armament distributed along the whole fuselage. It is one of the best-known bombers of its day and a very frequent subject in modeling.

Application tips

First finish and degrease the surface the decals will go onto — ideally with alcohol on a cotton bud. Moisten the backing paper under the chosen element with a sponge and a drop of detergent and wait until the element releases. Lift it off with tweezers, not with your fingers, and fix it with white PVA glue; the manufacturer does not recommend cyanoacrylate glue. Lay the element in place, check the position and only then press it down with a cotton bud from the center to the edges. A decal softener is not used at all, as its chemistry attacks the printed layer. A finished interior does not have to be varnished; if you nevertheless want to even the gloss out, use a fine spray of matte varnish from a greater distance and in thin layers.

Who the set is for

  • Builders of the B-17G model in 1:48 scale who want an interior without lengthy painting of the instruments
  • Modelers who do not get on with coloring tiny dials by hand
  • Those building a model with open hatches and glazing, where the interior is visible
  • Those interested in a quick rise in the level of detail without sanding and gluing

The set is an accessory for a model. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a set of decals for the interior. The B-17G kit has to be obtained separately.

They have a real thickness, so the instruments look three-dimensional. Only the backing paper is moistened, the element is lifted off with tweezers and fixed with PVA glue; a decal softener is not used at all.

It is a set of 3D decals for the interior. The exact package contents are given on the packaging of the set.

What the set is intended for is given on the packaging. Check against it that the set matches your model.

Last seen

1:48 Boeing B-17G Flying Fortress SPACE-25 %Stock ClearanceFavorite
EduardED3DL480211:48

1:48 Boeing B-17G Flying Fortress SPACE

Boeing B-17G Flying Fortress SPACE in 1:48 scale is a set of Eduard 3D decals for a detailed rendering of the interior. It is not a kit but an accessory for a model already obtained.
4 leftof 7
11.80 €8.84 € You save 2.96 €
AiresAIR42661:48

1:48 F/A-18C Hornet exhaust nozzles - opened position

The resin detail set Aires F/A-18C Hornet exhaust nozzles in 1:48 scale in the open position. Resin exhaust nozzles for a plastic kit, not a standalone model.
In stock
20.80 €
RESArmRA48-090051:48

1:48 BRISTOL BEAUFIGHTER motor cover

A resin engine cowling for models of the Bristol Beaufighter fighter-bomber in 1:48 scale. It sharpens the shape of the engine nacelle.
In stock
7.56 €
BrengunBRL1440791:144

1:144 Fat Man - A bomb

1:144 Fat Man is a resin replica of the body of the 1945 aerial nuclear bomb scaled down to 1:144. It is not a kit or an airplane model but an accessory that a modeler adds to a bomber model already bought.
In stock
6.80 €
AML DecalsAMLA480771:48

1:48 Messerschmitt Bf-109 G-4 W.Nr14851 - Conversion Set

A resin conversion set Messerschmitt Bf-109 G-4 (W.Nr.14851) in 1:48 scale from the Czech brand AML for building one particular machine of the period.
In stock
9.96 €
1:32 Curtiss P-40F Warhawk exterior-25 %Stock ClearanceFavorite
EduardED324341:32

1:32 Curtiss P-40F Warhawk exterior

Curtiss P-40F Warhawk exterior 1:32 is an Eduard photo-etched set for the exterior detail of a model of the American fighter. It is not a kit but an accessory to a base model.
Last one!of 2
17.60 €13.20 € You save 4.40 €
EduardED738591:72

1:72 Spitfire Mk.II detail set for IBG

A photo-etched set of parts in 1:72 scale for a model of the Supermarine Spitfire Mk.II fighter, carried for the IBG kit.
In stock
13.80 €
Red Fox StudioRFSQS-480081:48

1:48 Lavochkin La-7 (for Academy kit)

1:48 Lavochkin La-7 is a 3D textured instrument panel and cockpit accessories on decal paper for the Academy kit in 1:48 scale. It is applied as a decal, not as a glued part.
In stock
9.56 €
EvergreenEVG8210

Profil HO proužek 0,6 x 2,8 mm

A beam profile 0.6x2.8 mm in polystyrene, one piece 35 cm long.
In stock
0.32 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.