15 €

1:48 Fw 190A-8 undercarriage legs BRONZE

Eduard 1:48 bronze landing gear legs for the Focke-Wulf Fw 190A-8 replace the plastic parts with metal castings that carry the weight of the model and do not twist. An accessory to a model, not an aircraft kit.

Scale1:48
Manufacturer Vyprodáno
Product EAN8591111697651

Responsibility details are not available.

15 €
12.40 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Fw 190A-8 1:48: bronze landing gear legs (Eduard)

A plastic landing gear leg has a thankless job on a finished model: it carries the weight of the whole airframe, often with nose weight on top of that, and in time it sags or breaks under it. A bronze casting solves that problem once and for all. Metal holds the geometry, stands up to being handled when a display case is moved, and at the same time allows a finer rendering of the leg, because it needs no extra thickness for safety. The set is made by the Czech firm Eduard.

The real subject

The Focke-Wulf Fw 190 of the A series was a single-seat fighter powered by the air-cooled BMW 801 fourteen-cylinder radial. Compared with contemporary fighters with liquid-cooled V12 engines it offered a more robust powerplant, a wide landing gear track and easy handling. The A-8 was the most numerous sub-version of the A series and carried heavier armament and extended equipment. The wide landing gear track and the legs retracting inward toward the fuselage are characteristic of this type, and on a model the landing gear is one of the most exposed parts.

Usage tips

Start by taking any small burrs off the metal castings with a needle file and leveling the surfaces to be glued. Before painting, degrease the metal thoroughly with alcohol and use a primer made for metal; without it the paint will not hold on smooth bronze and will rub off during assembly. They are glued with cyanoacrylate, and on loaded joints a gel type with a longer curing time is worth using. Put the greater weight of the part to use by standing the model on its wheels first and gluing the covers on afterward; the landing gear then settles itself under the real load. Finish the painting with a wash and a faint trace of wear on the contact surface.

Who the set is for

  • Modelers who want a model that still stands straight years later
  • Builders in 1:48 scale with nose weight in the model
  • Anyone interested in German fighters with radial engines
  • Anyone who often carries a model or shows it at competitions

This is an accessory, not a complete model. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Plastic sags in time under the weight of a model, especially with nose weight. A metal casting holds the geometry permanently and stands up to handling.

Degrease it with alcohol, lay down a primer made for metal and only then the paint. Without a primer the surface rubs easily while the wheels and covers are fitted.

With cyanoacrylate, and on loaded joints preferably the gel type with a longer curing time. Cement for plastic will not bond metal.

Metal legs are designed for a particular kit. Check before buying that the set matches the model you are building.

Last seen

HGWHGW1326411:32

1:32 A-20G HAVOC - SEATBELTS

A seat harness for the A-20G Havoc in 1:32 scale from HGW will replace the molded harness in the seat and lend the cockpit a believable look.
In stock
11.40 €
EduardED6487791:48

1:48 F4F undercarriage legs BRONZE

F4F undercarriage legs BRONZE 1:48 are precise turned and cast bronze main landing gear legs from Eduard that replace the plastic parts of a Grumman F4F Wildcat model.
In stock
27.80 €
1:48 Spitfire Mk. Vc undercarriage legs BRONZE-25 %Stock ClearanceFavorite
VyprodánoED6486711:48

1:48 Spitfire Mk. Vc undercarriage legs BRONZE

1:48 Spitfire Mk. Vc undercarriage legs BRONZE are bronze landing gear legs for a model of the Supermarine Spitfire Mk. Vc in 1:48 scale. A replacement for the plastic parts from a kit, not a model.
Last one!of 4
15 €11.24 € You save 3.76 €
EduardED6487471:48

1:48 F6F undercarriage legs BRONZE

The F6F undercarriage legs BRONZE (1:48) are turned metal main landing gear legs in bronze from Eduard that replace the plastic parts and carry the weight of a model better.
In stock
19.80 €
HGWHGW1245071:24

1:24 Hawker Typhoon Mk.I B

HGW – fabric seat belts for the Hawker Typhoon Mk.I B (1:24) . Laser cut fabric seat belts with photo-etched buckles for a large scale model of the British fighter-bomber.
In stock
10.48 €
1:350 USS Wasp LHD-1 part 1-25 %Stock ClearanceFavorite
EduardED533181:350

1:350 USS Wasp LHD-1 part 1

Photo-etched set for the model of the USS Wasp LHD-1 amphibious assault ship in 1:350 scale, listed as part one. The metal parts replace details that are always too thick in plastic.
Last one!of 2
37 €27.76 € You save 9.24 €
HGWHGW1326131:32

1:32 MESSERSCHMITT BF109E-7 - PÁSY

Fabric seat belts with photo-etched buckles for Messerschmitt Bf 109E-7 models in 1:32 scale.
In stock
9.64 €
1:350 USS Ranger CV-4 part 3-25 %Stock ClearanceFavorite
EduardED533131:350

1:350 USS Ranger CV-4 part 3

1:350 USS Ranger CV-4 part 3 - the third part of the Eduard photo-etched line for the American aircraft carrier in 1:350 scale.
2 left
37 €27.76 € You save 9.24 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.