1:48 Mil Mi-24V/VP Wheel bays

1:48 Mil Mi-24V/VP Wheel bays is a photo-etched detail set from the Metallic Details brand for the landing gear bays of the Mi-24 helicopter in 1:48 scale. It is an accessory for a kit, not a standalone model.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111713610

Responsibility details are not available.

17.96 €
14.84 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 Mil Mi-24V/VP Wheel bays, landing gear bays from Metallic Details

The photo-etched set from the Metallic Details brand serves for working up the landing gear bays on a model of the Mil Mi-24 attack helicopter in 1:48 scale. It is not a model of the helicopter, but an accessory. You obtain the base kit separately and the set replaces or complements the simplified plastic parts in it.

Why the landing gear bays

The Mi-24 has retractable landing gear and the bays of the main wheels are clearly visible from below and from the side on a parked machine. In kits these areas tend to be bare and shallow, without the texture of the skin, the struts and the runs. Photo-etched sheet has the correct thickness in 1:48, so the ribbing and the covers look like sheet metal parts rather than an impression of the mold. The set pays off most on a model on a stand or in a diorama, where the landing gear is in view.

The real subject

The Mil Mi-24 is a heavy attack helicopter with an armored cockpit and a cargo compartment for troops. The Mi-24V version carries antitank guided missiles and a traversing machine gun turret in the nose, while the Mi-24VP has a fixed twin-barrel cannon instead of it. From the outside the two versions differ precisely in the nose, and otherwise they are very similar, so this set serves both.

Building and painting tips

With photo-etched parts the preparation decides. Cut the parts off with a scalpel, deburr the remains of the tabs with a file and only then form them. The bending is done along the etched grooves, which set the exact angle, and best of all in a bending tool, because thin sheet easily ripples when bent with pliers. Dose the cyanoacrylate glue in minute drops, so that it does not run into the engraving. Degrease the brass with alcohol and apply a primer before painting, otherwise the paint does not hold on the smooth metal and is scuffed off during assembly.

Who the set is for

  • modelers building the Mi-24 in 1:48 scale
  • builders of dioramas with a parked machine
  • advanced modelers with experience of bending photo-etched parts
  • those interested in helicopter aviation machines

The set is an accessory for building a model, not a standalone model. It is supplied unassembled and unpainted; glue, paints and the base kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a photo-etched accessory for the landing gear bays, and you obtain the kit separately.

They differ in the armament in the nose: the Mi-24V has a traversing machine gun turret and the Mi-24VP a fixed twin-barrel cannon.

Yes, on a model on a stand or in a diorama the bays are clearly visible from below and from the side.

A scalpel, a file for deburring the tabs, a photo-etch bending tool or two razor blades, cyanoacrylate glue and a primer.

Last seen

Mettalic DetailsMDR48711:48

1:48 Mil Mi-24V/VP Wheel bays

1:48 Mil Mi-24V/VP Wheel bays is a photo-etched detail set from the Metallic Details brand for the landing gear bays of the Mi-24 helicopter in 1:48 scale. It is an accessory for a kit, not a standalone model.
In stock
17.96 €
1:48 de Havilland DH.82a Tiger Moth wheels-25 %Stock ClearanceFavorite
EduardED6485561:48

1:48 de Havilland DH.82a Tiger Moth wheels

de Havilland DH.82A Tiger Moth wheels in 1:48 scale are a resin accessory from the Czech manufacturer Eduard. It is not a model of an aircraft but replacement wheel parts for kits of the Tiger Moth trainer biplane.
3 leftof 7
6 €4.52 € You save 1.48 €
Art ScaleASKT0058

Lead Wire - Round Ø 1 mm x 120 mm (14 pcs)

Lead wire, round, 1 mm diameter, 120 mm long (14 pcs) is a soft modeling wire for making heavier cables, hoses and runs on models.
In stock
3.60 €
Leonardo da Vinci Mechanical Drum (22,5 cm)-25 %Stock ClearanceFavorite
ItaleriIT3106

Leonardo da Vinci Mechanical Drum (22,5 cm)

A plastic model of Leonardo da Vinci's mechanical drum from Italeri (the finished model is roughly 22.5 cm long). The kit renders one of the moving inventions of the Renaissance master.
Last one!
17.96 €13.48 € You save 4.48 €
1:32 Bell AH-1G Cobra-25 %Stock ClearanceFavorite
EduardJX2791:32

1:32 Bell AH-1G Cobra

A masking set for the Bell AH-1G Cobra in 1:32 scale from the Czech maker Eduard. Self-adhesive masks for the cockpit glazing, not a kit.
Last one!of 2
7 €5.24 € You save 1.76 €
GasPatch modelsGP12-480081:48

1:48 Type B Metal Turnbuckles (30 items)

Metal turnbuckles type B (30 pieces) in 1:48 scale from GasPatch models — accurate rigging turnbuckles for tensioning biplane bracing faithfully.
In stock
15.16 €
PANZER ARTRE35-2741:35

1:35 T-34/76 rear fuel tanks (huge pattern)

Rear fuel tanks for the T-34/76 in 1:35 from PANZER ART, in the large pattern. A resin accessory for the kit, not a kit.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.