20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 MK-24 as used on the Cessna O-2A

Metallic Details 1:48 Mk 24 is a resin set of the Mk 24 underwing store of the kind the Cessna O-2A carried. It is a detail accessory to a model, not a kit of the aircraft.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111713610

Responsibility details are not available.

2.76 €
2.28 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Mk 24 in 1:48 scale - an underwing store for the Cessna O-2A (Metallic Details)

A small resin set from Metallic Details in 1:48 scale. It captures the Mk 24 underwing store in the form the Cessna O-2A Skymaster carried. On light observation aircraft the stores in injection-molded kits tend to be worked out only roughly, or to be missing altogether, so a separate casting is the quickest way to complete a model with a convincing load. It is not a kit of the aircraft but an accessory to a model that is already built.

The real subject

The Cessna O-2A Skymaster is the military version of the civil twin-engine Skymaster. Its engines are mounted in tandem, one at the front and the other behind the cabin, and the tail surfaces are carried on a pair of booms. It was used for observation, reconnaissance and forward air control, that is for tasks flown slowly, low down and often at night. The equipment on the wing pylons went with that, and the Mk 24 designation belonged among it. The store has a cylindrical body and is simple in design, so on a model it works above all as a characteristic shape under the wing that completes the fit for a particular mission.

Building and painting tips

Wash the casting in warm water with detergent and free it of mold release agent. Cut the casting block off with a fine saw as close to the part as possible, sand the remainder away and take care that the cylindrical body stays straight and even. Sand wet and protect your airways. It is glued with cyanoacrylate glue; on small parts an accelerator helps, because it shortens the time you have to hold them. Apply a primer before painting. The base shade follows, then a discreet highlight on the edges and, if you like, fine traces of service. Before you glue it to the model, check the position of the pylon and the symmetry of the left and right sides, because on small stores any asymmetry shows at once.

Who the set is for

  • Builders of the Cessna O-2A in 1:48 scale
  • Modelers who add external stores to light observation aircraft
  • Anyone interested in American equipment of the Vietnam War era
  • Modelers with experience of small resin parts

This is a detail accessory, not a stand-alone model. The set is supplied unassembled and unpainted; the kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a small resin store. A Cessna O-2A kit in 1:48 scale has to be bought separately.

If you plan to fit both pylons, the number of pieces is stated on the box.

It is the form used on the Cessna O-2A, that is a store of a light observation aircraft. The exact sub-version is stated on the box.

Cement for plastic will not do it. Use cyanoacrylate glue, with an accelerator on a small part, and degrease the surface beforehand.

Last seen

Mettalic DetailsMDR481311:48

1:48 MK-24 as used on the Cessna O-2A

Metallic Details 1:48 Mk 24 is a resin set of the Mk 24 underwing store of the kind the Cessna O-2A carried. It is a detail accessory to a model, not a kit of the aircraft.
In stock
2.76 €
ModelsvitMSV720801:72

1:72 Dassault Mirage 2000-5F Ukrainian Air Force

An injection-molded plastic kit of the Dassault Mirage 2000-5F of the Ukrainian Air Force in 1:72 scale from the manufacturer Modelsvit, including a Scalp EG missile.
In stock
43.56 €
MiniartMA370261:35

1:35 Chinese Medium Tank Type 59 - Early Production

An injection-molded plastic kit, MiniArt Chinese medium tank Type 59 (Early Production) , in 1:35 scale.
In stock
41.96 €
1:350 International Marine Signal Flags
-20 %
Favorite
EduardED531391:350

1:350 International Marine Signal Flags

Eduard 1:350 international marine signal flags is a color photo-etched accessory for ship models. It is not a model but a set of pre-printed signal flags.
In stock
13.80 €11.04 € You save 2.76 €
1:32 USAF 250 gallons flightline tank
-20 %
Favorite
Aires/AerobonusAER3200811:32

1:32 USAF 250 gallons flightline tank

The USAF 250 gallon flightline tank (1:32) is a resin accessory of airfield ground support equipment for dioramas in 1:32 scale.
In stock
13.60 €10.88 € You save 2.72 €
GasPatch modelsGP23-353001:35

1:35 US NSI Fuel Cans 1942 (12 pcs)

American cans for fuel, the 1942 year for 1:35 scale: the equipment that practically every Allied column carried.
In stock
13.96 €
1:32 USAAF Fighter pilot 1940-45 N°1
-20 %
Favorite
Black Dog modelBDF321351:32

1:32 USAAF Fighter pilot 1940-45 N°1

USAAF Fighter pilot 1940-45 No. 1 (1:32) is a Black Dog resin figure depicting a fighter pilot of the US Army Air Forces of the Second World War.
In stock
14.36 €11.49 € You save 2.87 €
1:32 MiG-23ML Flogger G electronic bay
-20 %
Favorite
AiresAIR21841:32

1:32 MiG-23ML Flogger G electronic bay

MiG-23ML Flogger G electronic bay 1:32 is a resin detail set from Aires for refining the internal compartments of a model.
In stock
22.80 €18.24 € You save 4.56 €
1:32 BRU-42/A Improved Triple Ejector Rack (ITER) (5 pcs) (F-14D, AV-8B, F/A-18A/B/C/D)-25 %Stock ClearanceFavorite
ReskitRS32-03841:32

1:32 BRU-42/A Improved Triple Ejector Rack (ITER) (5 pcs) (F-14D, AV-8B, F/A-18A/B/C/D)

Reskit 1:32 BRU-42/A Improved Triple Ejector Rack (ITER) is a resin set of five triple racks in 1:32 scale. It lets you hang three bombs or tanks on a single pylon of the model.
2 leftof 6
11.16 €8.36 € You save 2.80 €
Green Stuff WorldGSW1599

Acrylic Color CAMOUFLAGE GREEN

A subdued green shade from the Green Stuff World acrylic range, water-thinnable and matte, pitched at military uniforms and vehicles.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.