A detailed resin cockpit for the Mitsubishi A6M5 Zero in 1:48 scale raises the interior of a model of the late Japanese carrier fighter.
Responsibility details are not available.
This cast set from the Czech brand CMK completes a 1:48 model of the Mitsubishi A6M5 with a faithful pilot's space. Resin holds the fine edges of the instrument panel, of the stiffeners and of the side consoles, so once the canopy is slid open there is something to look at in the cockpit. The original plastic equipment is removed from the model.
The A6M5, designated the Type 52, was the most numerously produced version of the whole family. Its shortened and strengthened wing with rounded tips allowed it a higher speed in a dive, and the exhaust pipes were led out individually and contributed to the thrust. Despite these modifications the machine could hardly keep up with its American opponents in 1944, and many of its pilots went into battle with minimal training.
Rinse the castings to rid them of mold release agent and separate the casting blocks with a fine saw. Catch the sanding dust with water, so that it does not get into the airways. Do the gluing in with super glue after measuring up dry beforehand, because once resin has set it can no longer be moved. Spray and shade the interior before you close the fuselage up, because once the halves are glued together the walls of the cockpit can no longer be reached.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!