A resin interior for the Mitsubishi A6M2 and A6M3 Zero in 1:48 scale exchanges the simplified plastic cockpit for a detailed cast assembly.
Responsibility details are not available.
This set from the Czech brand CMK is cast from polyurethane resin and replaces the cockpit of the 1:48 model of the Japanese carrier fighter Mitsubishi A6M in the A6M2 and A6M3 versions. The castings carry the texture of the floor, of the side walls and of the seat with its tubular frame, that is the details injection-molded plastic usually only suggests.
The A6M2 entered service in 1940 and thanks to its exceptional range and agility became the symbol of the first months of the war in the Pacific. The following A6M3 version was given the more powerful Sakae engine with a two-stage supercharger, and some machines also a shortened wing with no folding tips. The inside of the pilot's space stayed the same in its basic features in both versions, which allows the set to cover both branches of the family at once.
The resin assemblies are tried dry while the halves of the fuselage are still free. The inner walls of the plastic usually have to be thinned with a sanding bit, so that the fuselage can be pulled together with no gap once it is inserted. Cut the casting blocks off with a saw under water or with a respirator; dust from resin is not to be inhaled. Choose the paint according to the factory that produced the real subject and accentuate the edges with a dry brush after spraying.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!