Hexagon flange bolts 1.5 to 2.5 mm from Decalcas: a set of 240 printed fasteners for detailing car models. An accessory, not a kit.
Responsibility details are not available.
A flange bolt has a widened plate under its hexagon head, which spreads the pressure over the part beneath. On real cars bolts like these hold brake calipers, wheel hubs, exhaust brackets and a great many parts in the engine bay. The set brings 240 of them, made by 3D printing from resin with a sharp hexagon and a legible flange rim. It is not a kit but a stock of details for models you are building or improving.
The elements are supplied in five sizes of 48 pieces each: 1.5 mm, 1.75 mm, 2 mm, 2.25 mm and 2.5 mm. The range covers the usual needs of car and motorcycle models in 1:24 scale, where bolt heads are a visible element of the chassis and the engine.
Cut the parts off their support with a sharp scalpel close to the base and level the surface with a fine file. They are glued with super glue, that is cyanoacrylate. The detail is so fine that a heavy coat of primer would clog it: paint with a thin coat. A metallic look stands out over a dark base, and a dark wash then flows nicely into the gap under the flange. Tweezers with fine tips are a necessity when fitting them.
The set is supplied unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
