1:72 Alpha Jet A - Pitot Tube & Angle Of Attack probes

1:72 Alpha Jet A - Pitot Tube & Angle Of Attack probes

3.56 €
Add to Cart

1:72 Alpha Jet A - Pitot Tube & Angle Of Attack probes

A metal pitot tube and angle of attack probes for the Alpha Jet A in 1:72 scale are an accessory for a kit you have already bought, not a model. They replace the fragile plastic parts on the nose of the aircraft.

Scale1:72
Manufacturer MASTER
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Metal probes for the Alpha Jet A, 1:72 scale

A set of turned metal parts from the Polish manufacturer MASTER: the pitot tube and the angle of attack probes for a model of the Alpha Jet in the A version. In the small 1:72 scale these are the thinnest and most exposed parts of the whole model, which come out of the mold either too thick or break before the build is even finished. The metal replacement has the correct slim section and stands up to handling.

The real subject

The Alpha Jet is a twin-engine subsonic aircraft from a Franco-German program, built in a trainer as well as a light attack form. The version designated A was delivered to the Luftwaffe and was used above all for attacks on ground targets and for training. It carries a pitot tube on the nose and angle of attack sensors on the sides of the forward fuselage, which are among the characteristic recognition features of the type.

How to fit the accessory

The parts are small, so work over a light surface and use tweezers with fine tips. Cut the plastic stub off and drill a hole at the seating with a micro drill, starting with an undersize diameter and opening it up step by step. Set the metal part in dry, check the alignment from several angles and only then fix it with a drop of thin cyanoacrylate applied with a pin. Fit the probes as late as possible, ideally after painting and varnishing, otherwise they will be knocked at every further step. Degrease the metal and prime it before painting.

Who the set is for

  • builders of jet trainer and attack aircraft models in 1:72 scale
  • modelers whose plastic probes keep breaking
  • anyone interested in the equipment of European air forces
  • competition builders, where the fineness of the detail is judged

This is an accessory set for a model, not a kit. The model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They reproduce the sensors on the nose of the aircraft. The metal version is thinner and more durable than the plastic part from the kit.

At the end of the build, after painting and varnishing, so that they are not knocked during further work.

Tweezers, a sharp knife and a micro drill for drilling the seating. They are glued with cyanoacrylate.

Working with metal parts this small calls for patience and a steady hand, so it suits more experienced builders.

Last seen

MASTERAM721491:72

1:72 Alpha Jet A - Pitot Tube & Angle Of Attack probes

A metal pitot tube and angle of attack probes for the Alpha Jet A in 1:72 scale are an accessory for a kit you have already bought, not a model. They replace the fragile plastic parts on the nose of the aircraft.
In stock
3.56 €
Toro ModelTORO35D291:35

1:35 Polish APC Rosomak cz. 1 - Vol.1

Toro Model 1:35, Polish Rosomak wheeled carrier, volume 1 is a set of waterslide decals with the markings of this armored vehicle. It is not a model but an addition to a finished kit.
In stock
7.96 €
Artwox ModelAW200471:700

1:700 HMS Renown 1945 (for Trumpeter kit 05765)

A veneer deck for the British battlecruiser HMS Renown in her 1945 state in 1:700 scale from Artwox Model will replace the plastic deck of the Trumpeter 05765 kit with wooden veneer with the laying of the planks printed on it.
In stock
17.16 €
Artwox ModelAW200221:700

1:700 HMS HOOD 1931 (For Trumpeter 05741)

The Artwox Model 1:700 veneer deck for the British battlecruiser HMS Hood in her 1931 form gives a model real wood instead of engraved plastic. An accessory to a kit, not a model in its own right.
In stock
18.36 €
LifecolorLIFUA628

UA628 - US Navy WWII Mahogany Stain

The wooden decks and boats of American ships need a warm brown tone, and that is what US Navy WWII Mahogany Stain from the Lifecolor acrylic range offers. A water-based acrylic paint for the wooden elements of ship models.
In stock
2.76 €
MASTERAM1440361:144

1:144 Harrier GR.1 / T.2 / AV-8A / AV-8C - Pitot Tube

A pitot tube for the Harrier GR.1, T.2, AV-8A and AV-8C in 1:144 scale is a turned metal accessory from the Polish manufacturer MASTER. It replaces the coarse plastic part on the nose of a model.
In stock
3.56 €
VallejoVALT04004

Flexi Sanders Dual-Grit (80x30x12mm)

A thicker sanding sponge 80 x 30 x 12 mm with two grits. Intended for large flat areas.
In stock
5.56 €
VallejoVALT01002

Set of 20 Drill Bits, No 61-80

In stock
17.16 €
MineshimaMNS-L10-12

Drill Bit 1.2mm L10-12

The Mineshima 1.2 mm modeling drill bit is intended for drilling larger holes for pins, dowels and reworking plastic parts in a pin vise.
In stock
3.96 €
ICMICM358311:35

1:35 Model T Runabout 1918

An injection-molded plastic kit of the Model T Runabout 1918 in 1:35 scale from ICM. The subject is a light two-seat Ford with an open body and a folding fabric top.
In stock
24.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.