1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

8.36 €
Add to Cart

1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

Quinta Studio 1:72 F-15 Eagle (early) 3D interior decal gives the cockpit three-dimensional, pre-colored details applied the wet way, like a decal. Target kit: GWH.

Scale1:72
Manufacturer Quinta Studio
Product EAN0591111871878

Responsibility details are not available.

8.36 €
6.91 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:72 F-15C Early / F-15A / F-15J early - 3D interior decal

A color 3D interior decal from Quinta Studio in 1:72 scale on backing decal paper. The details are printed on a flexible carrier with real relief, so the instrument panel with its analog instruments, the side consoles and the controls look three-dimensional even in a small scale. The colors and the labels are pre-printed, so the interior does not have to be painted. The decals are shaped to the parts of the GWH kit.

The real subject

The F-15 Eagle is an American heavy fighter built for air superiority, renowned for its performance, its pair of engines and its long range. The early F-15A and F-15C versions, as well as the Japanese F-15J, used a cockpit with mostly analog combined instruments. The set is aimed at precisely this older cabin layout.

Application and tips

The part is cut from the sheet, dipped in lukewarm water for about fifteen seconds and slid off the backing paper into place. The parts have no adhesive layer of their own and hold on a gloss varnish such as Future or Klear, or Tamiya X-22; on broken-up surfaces a drop of super glue helps. Do not use a decal softener or a decal fixer, as the chemicals attack the printed resin. In 1:72 scale it pays to work with a fine tool and in good light.

Who the set is for

  • Modelers who want a realistic cockpit without laborious painting
  • A quick, clean alternative to photo-etched sets
  • Builders of models of the early F-15 versions in 1:72 scale
  • Anyone after faithful instrumentation even in a small scale

The set contains the interior 3D decals only. The plastic kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The early cockpit layout common to the F-15C early, the F-15A and the F-15J early, with mostly analog instruments.

No, the colors and the instrument labels are pre-printed. The interior is ready to use without painting.

Yes, but the parts are tiny, so a fine tool, a sharp scalpel and good light are advisable.

It is intended for the GWH kit.

Last seen

Quinta StudioQD720791:72

1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

Quinta Studio 1:72 F-15 Eagle (early) 3D interior decal gives the cockpit three-dimensional, pre-colored details applied the wet way, like a decal. Target kit: GWH.
In stock
8.36 €
IBG modelsIBG72M0031:72

1:72 PZL P.23 Karas - canopy PAINTING MASKS (for IBG Models kits: 72505-72511)

PZL.23 Karas canopy painting masks in 1:72 are precisely cut masks from IBG for a clean spray of the framing of the glazing of the Polish light bomber.
In stock
4.76 €
Voyager ModelPEA3361:35

1:35 WWII U.S.M8/M20 armored car tyre chains (For TAMIYA 35228 35234/ITALERI 6364)

A photo-etched set of tire chains for the M8 and M20 armored cars of the Second World War in 1:35 scale is an accessory for Tamiya 35228 and 35234 or Italeri 6364 kits you already own, not a model of the vehicle. It is made by Voyager Model.
In stock
10.36 €
Plastruct PLT90623

Squere Tubing (1 pcs) H-6,4mm W-6,4mm I.D-5,2mm Wall-0,6mm L-375mm

Plastruct square tube (Square Tubing) in polystyrene, outside 6.4 x 6.4 mm, inside 5.2 mm, wall thickness 0.6 mm and length 375 mm is a hollow modeling profile.
In stock
1.40 €
ReskitRS48-04031:48

1:48 Pylons for Mikoyan MiG-29 (APU-470 2 pcs for R-27 & APU-60 2 pcs for R-60

Pylons for the MiG-29 in 1:48 scale (Reskit) are a 3D printed accessory with APU-470 rails for R-27 missiles and APU-60 rails for R-60 missiles. It is not an aircraft model but weapons pylons.
In stock
10.76 €
ReskitRS72-05761:72

1:72 GBU-10 Paveway I laser guided bombs with BSU-37/B fin and BSU-3A/B wing (slow speed) thermally protected (2 pcs)

GBU-10 Paveway I - thermally protected (2 pcs) 1:72 - a resin 3D-printed set of two laser-guided bombs with a thermal protective surface, the BSU-3A/B wing and the BSU-37/B fin from Reskit.
In stock
9.56 €
Plastruct PLT90624

Squere Tubing (1 pcs) H-7,9mm W-7,9mm I.D-6,7mm Wall-0,6mm L-375mm

Plastruct square tube (Square Tubing) 7.9 x 7.9 mm is a hollow styrene profile 375 mm long for building structures and model accessories.
In stock
1.80 €
Star DecalsSD35-C10031:35

1:35 Slovenija # 1. TO, 1991 Ten-Day-War. M36B2, T-55, M-84, BTR-50PK

The Slovenija decal set in 1:35 scale from Star Decals is devoted to the equipment of the TO from the Ten-Day War of 1991: the M36B2, T-55, M-84 and BTR-50PK machines.
In stock
10.76 €
1:32 Mk.84 thermally protected/BLU-117 with BSU-36/B bombs (2 pcs) (AV-8B, F-14, F/A-18)-25 %Stock ClearanceFavorite
ReskitRS32-05251:32

1:32 Mk.84 thermally protected/BLU-117 with BSU-36/B bombs (2 pcs) (AV-8B, F-14, F/A-18)

1:32 Mk.84 thermally protected/BLU-117 with BSU-36/B bombs (2 pcs) are two resin replicas of a thermally protected heavy bomb for models in 1:32.
5 leftof 6
15.56 €11.68 € You save 3.88 €
ReskitRSU48-02681:48

1:48 Canadair Sabre F.4/North-American F-86F-40 Sabre exhaust nozzle

Reskit 1:48 exhaust nozzle for the Canadair Sabre F.4 / North American F-86F-40 Sabre is a 3D-printed resin replacement nozzle with faithful interior detail.
In stock
12.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.