1:72 F-4 Phantom II F-4E/F-4J/F-4F/F-4G/F-4S) exhaust nozzles

The real subject

The McDonnell F-4 Phantom II is an American twin-engine, two-seat fighter and attack aircraft, one of the most widespread Western combat machines of the Cold War. Its anhedral tailplane and the dihedral of the outer wing panels are unmistakable. The F-4E version received an internal cannon and a modified nose, the F-4G was converted for the suppression of air defenses, the F-4F served with the Luftwaffe and the F-4S was an upgraded naval machine derived from the F-4J.

What the set contains

Replacement engine exhaust nozzles for a model in 1:72 scale, shaped with detail that cannot be fitted into the parts of a kit. According to the name they are intended for the F-4E, F-4F, F-4G, F-4J and F-4S versions. The number of parts and the recommended kit are given in the manufacturer's instructions.

Building and painting tips

The parts are not made of polystyrene, and ordinary modeling cement will not join them. Use super glue, and a slow-setting one on larger surfaces. Cut off the excess material with a sharp blade a little away from the part and carefully sand the rest down, so as not to disturb the shape of the nozzle edge. Wash and degrease the parts before painting. Paint and shade the inside of the nozzle before you glue it to the fuselage, because afterward you can no longer reach it.

Who it is for

The set suits modelers who find the rear of a model lacking in depth and detail. Replacing the nozzles is among the modifications with the best ratio of work to visible result, because the rear of a finished model is seen from every angle. Even a less experienced builder can manage it. The model, paints and glue are not part of the delivery, unless stated otherwise.