A photo-etched set for the Soviet heavy self-propelled guns ISU-152 and ISU-122 in 1:72 scale from Hauler.
Responsibility details are not available.
One set covers both sister vehicles, because they share the same hull and most of the external equipment. In a small scale metal detail makes particularly good sense: it is grilles and brackets that get simplified most of all here, and the difference after replacing them is visible at first glance.
Soviet heavy self-propelled artillery on the chassis of the IS tank came about in two main forms. The ISU-152 carried a 152 mm gun-howitzer and was used against fortifications as well as built-up areas, while the ISU-122 had a 122 mm gun with a flatter trajectory and dealt better with armored targets. Both vehicles have a closed angular superstructure with a front plate sloped backward and a barrel projecting far beyond the outline of the hull.
Work on a light surface and in good light, otherwise the trimmed parts will disappear on you. Tweezers with a fine tip and a sharp scalpel are a necessity. Dose the glue with a pin in minute drops; the excess will fill exactly those pressings that the photo-etching is fitted for. Degrease the metal before spraying, otherwise the paint will not hold on the edges.
The set serves to complete a kit; the vehicle itself is not in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!